www.Diamond-Models.gr

  Καταστήματα
  Κεντρική σελίδα
  Αρθρα
  Links
  Σύλλογοι
  Γιατί αυτή η σελίδα;

WWW Aeromodelling GR

Aeromodelling GR - IBabylon ThemeClassic YaBB SE ThemDelta TPNetBiz TPOmega TPSMF Default Theme

[Diamond-Models Ι. Γεωγιάδης]

SkyRC GPS Meter





Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can
fly. Now all these data come at your finger with the GPS SPEED METER by SkyRC.

The popularity of GPS devices inspired SkyRC to design this gadget at about 41g. The Speed
Meter is the result of SkyRC’s ongoing development efforts, boasting an ultra compact GPS
module with hidden antenna design, the high-sensitivity GPS receiver chip can do quick
positioning, a robust controller IC to keep recording speed and altitude in real time.

This gadget is ideal for RC racing/flying and casual biking, driving and long journey. User could
easily view the screen while working out data such as speed, altitude total mileage/kilometer,
longitude/latitude.

The gadget records the top speed and top altitude for instant recall after the running. It will help
RC fans much to fine-tune their RC gadgets to achieve better performance.

• Compact and easy to carry
• Speed meter with top speed memory
• Top altitude
• GPS Coordinator
• Built-in 4M flash (recording time: 6 hours)
• UTC timestamp logged for each track point
• Built-in rechargeable, LiPo bettery 200mAh (Operating time: 150 minutes)
• Support both Metric and Imperial system of measurements
• PC link for data logging & google map
• Firmware upgradable
• 32 parallel satellite searching channels
• Receiver: L1, 1575.42 MHZ
• Frequency: 1.023 MHZ
• Update frequency: 1 Hz.
• Antenna type: Built-in
• Satellite signal reception sensitivity: -159dBm
• Operating temperature: 0? to +50?
• Storage temperature: -10? to +60?
• Operating humidety: 5% to 90%

GPSLOGGER SOFTWARE
You can use SkyRC application software “GpsLogger”to transfer the log data to PC and easily
export the log data to “Google Earth” Please visit Google Earth website
http://earth.google.com for more information.

• Transfer the log data to PC and show the track data on Google Earth
• Save the log data to PC
• Select the language between English and Chinese
• Change Metric and Imperial system of measurement
• GPS update rate selection
• Firmware upgrade

Download Software & Upgrade
   

Specification
Weight:    41g
   
Dimensions:    65.7 x 39.6 x 20.8mm

[Diamond-Models Ι. Γεωγιάδης]

Udi U839 Nano Quad 2.4GHz Red-Green RTF





UDI have taken the proven technology of their larger quadcopters and shrunk it down into this Nano U839 drone quad. When set in advanced mode the U839 is incredibly nimble yet in the novice setting it is suitable for beginner to learn with thanks to the stability provided by the inbuilt 6 axis gyro. The battery is easily removable allowing you to have a spare and keep flying after you have used the first one. With all the features and manoeuvrability of a larger quadcopters but at a fraction of the price you really can't go wrong with the Nano U839.

A compact 4 Channel 2.4GHz transmitter is included that uses the same battery as the quad itself allowing quick recharging and long life. The included USB charger can charge both the quad flight battery and transmitter battery meaning you really have everything included in box.

• Fully Assembled and ready to fly
• Three separate control settings (Novice, Intermediate & Advance)
• Rechargeable transmitter battery
• Easy to replace flight battery
• Flips in four different directions
• Plastic propeller guard
• LED lights

Note: Both Tx and Quad require charging before use.    

Specification
Length:    88mm
   
Height:    28mm
Radio System:    4 Channel 2.4GHz (Inc.)
   
Electric Motor:    4x Brushled (Inc.)
LiPo:    1S 3.7v 150mah (Inc.)
   
Charger:    USB (Inc.)
Width:    88mm
   
Rotor Diameter:    36mm (Each)

[Diamond-Models Ι. Γεωγιάδης]

JOYSWAY electric BULLET model ARTR with 2.4Tx






Shooting across the water, the new Bullet Speedboat will certainly leave its mark. Supplied with 2.4GHz radio gear, a 30A water-cooled brushless ESC w/ BEC mated to a powerful 2815 out-runner brushless motor, tough 37g steering servo and CNC aluminium rudder, it just requires an 11.1V 2200mAh 20C LiPo pack, balance charger plus 8 'AA' batteries for the transmitter to complete.    

Specification
Hull Material:    One Piece Blow Moulded
   
Length:    729mm (28.7")
Weight:    1.25kg (2.75lb)
   
Servos:    1x 37g (Inc.)
Radio System:    3 Channel 2.4GHz (Inc.)
   
Electric Motor:    Water Cooled 2815 Outrunner (Inc.)
Speed Controller:    30A Water Coolled (Inc.)
   
LiPo:    11.1v 2200mAh 20C (Req.)
Beam:    180mm (7.1")

[Diamond-Models Ι. Γεωγιάδης]

Joysway Magic Cat RTR 2.4GHz




 Despite its diminutive size, the brilliant Magic Cat reaches a high speed of 20km/h with its powerful water cooled 180 size motor! Offering Includes an AC Charger ( for 7.2V Power Pack) and a 9V Dry Battery ( for Transmitter). Outstanding value for money. Buy two and enjoy some exciting pond racing with a friend!

Included:
• 2.4GHz 2Ch Digital Proportional R/C System
• 5A Electronic Speed Controller
• 9g Rudder Servo
• 6V 260mAh Power Pack
• AC Charger (for 6v Power Pack)
• 9V Dry Battery (For Transmitter)
     
Specifications
Length:    265mm
Weight:    135g
Servos:    1x 9g Rudder (Inc.)
Radio System:    2 Channel 2.4GHz
Electric Motor:    Brushed (Inc.)
Speed Controller:    5A (Inc.)
NiCad/Ni-MH:    6V NiMH (Inc.)
Beam:    72mm

[Diamond-Models Ι. Γεωγιάδης]

ESM MIG-3 Color F 80" Wingspan (2032 mm) Model ARF






Wing Span:    80" (2032 mm)
Length:    66" (1676 mm)
Wing area:    7.7sq. ft (71 sq dm)
Wing Loading:    40 oz/sq. ft (123 g/sq. dm)
Flying Weight:    19 lbs (8.7 kg)
Radio:    6ch & 7 servos
Engine:    35cc gasoline engine

[Diamond-Models Ι. Γεωγιάδης]

FLYMODEL CESSNA 421 twin engine








Top quality wood construction with fiberglass fuselage
Comes with all hardware and accessories

Wing span: 1800 mm / 71 in       
Fuselage length: 1590 mm / 62.6 in
Flying weight: 5000 g / 11 lbs     
Wing area : 763 sq in / 49.5 sq.dm
Engine Required: 2c 0.40x2   
Radio Required: 6ch ; 10-11 Servos

[Diamond-Models Ι. Γεωγιάδης]

Electron electric retracts set (3 pcs+controler) for 15KG model






Technical data
Control electronics:    Digital
Gearing:    Metall
Operating voltage:    5,0-9,0 V
Dimensions:    103,0 x 24,0 x 32,5 mm

[Diamond-Models Ι. Γεωγιάδης]

BRAINERGY LiPo 3s1p 11,1V 2.200mAh 45C T-PLUG
Τιμή: €24.99



Technical data
Configuration:    3s1p
Nominal voltage:    11,1 V
Rated capacitance:    2.200 mAh
Charge rate (maximum):    2C (4,4 A)
Discharge rate (continuous):    45C (99 A)
Dimensions:    101 x 33,5 x 21 mm
Weight:    154 g
Connection:    YUKIKING T-Plug

[Diamond-Models Ι. Γεωγιάδης]

FLYMODEL P-47D .120 wingspan=1800mm







  Product Name: P-47D Thunderbolt
 Wing span: 71 in / 1800mm             
Wing area: 806 sq in / 52 sq dm
 Flying weight:  9.2 lb / 4200g           
 Fuselage length: 56 in / 1420 mm
 Engine Required: 2c 0.91cu in    4c1.20 cu in   
 Radio Required:   6channels,7 servos

[Diamond-Models Ι. Γεωγιάδης]

Saito FG- 84R3 3-Cylinder Gas Radial Engine







    Gasoline version of the 450 3-cylinder radial
    Larger displacement than the glow version
    2S Li-Po battery compatible ignition without a regulator provides easy starts and reliable performance
    Engine heat sink for better cooling and performance through an aerobatic routine
    4-stroke sound Saito™ engines are famous for
    Complete with electronic ignition, mufflers and engine standoffs

Overview

The Saito™ FG-84R3 engine is the gas/petrol version of the existing FA-450R3 glow engine. This engine is designed specifically for large models and performance airframes. Above and beyond the advantages of a 4-stroke gas engine, this is the engine for those who like to run clean and efficient engines. Accompanied by the Saito power and precision craftsmanship, the distinguished look and sweet sound, this is the engine many of you have been waiting for. This engine delivers a larger displacement than the older 450 3-cylinder radial engine, and provides easy starts and reliable performance due to the 2S LiPo-compatible electronic ignition. The designed Walbro carburetor features a rotating barrel specially made for 4-stroke engines, ensuring reliable fuel feed and outstanding performance at any attitude. Engine heat sink provides better cooling and performance through an aerobatic routine. Complete with mufflers, engine mount, and electronic ignition.

As an expert in reliable 4-stroke engines, Saito engineers spent years developing the best-built 4-stroke gas engine. The power-to-weight ratio of a Saito engine creates a one-of-a-kind flying experience. For serious modelers, the long awaited arrival of the 450R3 gas version is here with the same quality, sound and precision craftsmanship Saito is known for.
Specs
Benchmark Prop:    24 x 10 @ 6,300 rpm
Bore:    36.0mm (1.42 in) x 3
Carb Type:    Walbro
Crankshaft Threads:    M10 x 1.25
Crankshaft Type:    Threaded
Cylinder Type:    Ringed
Displacement:    5.14 cu. in. (84.28 cc)
Engine (Only) Weight:    6.7 lb (3.1 kg)
Ignition Weight:    8.8 oz (250 g)
Muffler Threads:    M14
Muffler Type:    Flex tube
Muffler Weight:    5.5 oz (157 g)
Oil Type & Content:    20:1 gas/oil ratio
Plug Type:    CM-6
Prop Range:    23 x 10 – 24 x 10
RPM Range:    1,400 – 6,500 on ground
Recommended Fuel:    87-92 octane gasoline
Stroke:    27.6mm (1.09 in) x 3
Total Weight:    7.8 lb (3.5 kg) (includes engine, muffler, and ignition where appropriate)
Type:    4-stroke Airplane
Cylinders:    Radial
Fuel Type:    Gas

[Diamond-Models Ι. Γεωγιάδης]

FlyFly Hobby Condor Glider wingspan:3000mm






FlyFly Hobby - Condor Glider.The hull laminate, wing design (balsa) covered with foil.

Recommended accessories (not included) required to run the model:

     6 channel 2.4GHz Radio
     Li-Po 1800 mAh 7.4V 20C + BEC voltage stabilizer
     5x micro servo 9g + 1x 45g standard servo

 
Specifications
Wingspan: 3000 mm
Hull length: 1270 mm
Height: 280 mm
Weight (ready to fly): 1900-2100 g
Wing area: 50.4 dm2

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές Σεπτεμβρίου απο www.Diamond-Models.gr

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή Σεπτεμβρίου σε HiFei Speed controlers απο www.Diamond-Models.gr


Hifei Swordfish ProII 240A HV 12s water proof

Hifei ESC 160A-GII-12S

Hifei ESC 180A-GII-6S

καθώς επίσης και την πλήρη σειρά από HiFei ESC και Hifei Capacitor Banks

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή
Roban UH60 700 class 4 blade heads+Mechanics







Body length:    1700mm
Length incl. rotors:    1850mm
Width:    665mm
Height:    445mm
Main rotor diameter    1560mm
Main blade length:    750mm
Tail rotor diameter:    280mm
Tail blade length:    45mm
Main shaft diameter:    12mm
Tail shaft diameter:    5mm
Spindle diameter:    8mm
Main blade count:    4
Tail blade count:    4
Drive gear ratio:    1:13.8:4.7
Motor:*    1x 750MX 450KV brushless outrunner , 12S capable
Speed controller:*    1x 120A brushless, 12S capable
Servo:*    3x metal gear cyclic, 1x metal gear tail servo
Battery:*    44.4V 5000mAh 35C
Flight time:    5 minutes
Takeoff weight:    8000g
Flight Stabilization:*    3 axis flybarless gyro
Radio Control:*    min. 6 channel with pitch and throttle curves

This scale helicopter comes with a complete scale mechanic! Only electronic components are needed!

    12S 5000mAh Lipo battery, 30C +
    700 size standard cyclic and tail metal geared servos, not HV equipment needed
    Align 750MX 450KV Motor HML75M02 (or same size and KV class, no lower KV recommended, main shaft needs to be equally long!)
    3 Axis Gyro suitable for scale helicopters (e.g. Skookum 720, Bavarian Demon X)
    7 channel RC system (electric retract system is included and requires aux channel for control)
    120A HV ESC (govenor recommended but not necessary)

 

 

Description:
Robans new 700 size UH-60 is now available. It‘s the sixth product in our Super Scale series.
Our new True Scale Design locates the cockpit exactly at the right spot, unlike on most canopies based on 3D mechanics. The compact mechanic is built into the engine compartment, just like on a real helicopter. Therefore it allows space for front to back scale cockpit seats. The position light system programmable with 9 different patterns is preinstalled.
The fuselage of the UH-60 stands out through the detailed crafted surface details and the overall correctly scaled down shape. This unique scale look and details stun and make it hard to see the difference to a real helicopter.
The helicopter comes with a detailed instruction manual. The setup is simple and quick, the mechanics are completely preassembled. Only screw drivers and allen keys are required to make it airborne.

Features:

• Quad Blade Rotorhead and scale carbon fiber rotor blades included
• Quat Tail Blade and scale carbon fiber tail blades included
• Extremely detailed surface details, a realism unknown in this size class
• Complete seven seated scale cockpit
• Complete built in / preinstalled position lighting system (controllable via aux channel)
• Special CCPM mechanics built in the top section, as on a real helicopter
• Use of 750MX standard equipment (12S battery, 450KV motor), fly with your existing parts
• Take off weight of 9kg (about the double than a 700 3D helicopter)
• 1700mm long, exact 1/ scale
• Product comes preassembled and requires very few work to mobilize it

[Diamond-Models Ι. Γεωγιάδης]

Graupner WP Hott Deluxe PnP







Specification

Wing area : 21,0 dm²
All-up weight, approx.: 1000 g
Total surface area, approx. : 25,0 dm²
Tailplane area : 4,0 dm²
Overall length, approx.: 955 mm
Wingspan approx.: 1240 mm
Wing loading : 40,0 g/dm²