ΑΝΑΜΕΝΟΝΤΑΙEnErG Pro Brushless ESC The JP EnErG Pro ESCs high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns. It is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D electric helicopters.
Features Extremely low internal resistance
Super smooth and accurate linear throttle
Over-heat protection feature
Auto throttle shut down at loss of signal
Supports high RPM motors
Power arming protection (prevents the motor from running when accidentally switched ON)
Advanced programming software
ENERG PRO B-12 BEC ESC (12A) (2-4 CELLS)
EnErG Pro B-12 BEC
Continuous - 12A (Burst - 16A)
Weight - 13g
Size - 21x22x4mm
Lipo Cells - 2-4 (NiMH Cells - 5-12)
BEC Output - 5.0V/1A
Programmable - Yes (Manually or by Program card not included)
Program Card - 4404970
ENERG PRO 20 BEC ESC (20A) (2-4 CELLS)
EnErG Pro 20 BEC
Continuous - 20A (Maximum 10 seconds @ Burst - 30A)
Weight - 18g
Size - 23x33x6mm
Lipo Cells - 2-4 (NiMH Cells - 5-12)
BEC Output - 5V/2A
Programmable - Yes (Manually or by Program card not included)
Program Card -
4404925
ENERG PRO 40 SBEC ESC (40A) (2-6 CELLS)
EnErG Pro 40 SBEC
Continuous - 40A (Maximum 10 seconds @ Burst - 60A)
Weight - 32g
Size - 23x52x7mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC Output - 5.5V/4A
Programmable - Yes (Manually or by Program card not included)
Program Card - 4404925
ENERG PRO B-45 SBEC ESC (45A) (2-6 CELLS)
EnErG Pro B-45 BEC
Continuous - 45A (Burst - 65A)
Weight - 58g
Size - 30x56x11mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC Output - 5.0-5.5 or 6.0v (ADJUSTABLE) At 5A
Programmable - Yes (Manually or by Program card not included)
Program Card -
4404970
ENERG PRO B-65 SBEC ESC (65A) (2-6 CELLS)
EnErG Pro B-65 BEC
Continuous - 65A (Burst - 85A)
Weight - 63g
Size - 34x36x13mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC Output - 5.0-5.5 or 6.0v (ADJUSTABLE) At 5A
Programmable - Yes (Manually or by Program card not included)
Program Card - 4404970
ENERG PRO B-85 OPTO ESC (85A) (2-6 CELLS)
Specification Output :Continuous Current 85A, Burst Current 100A for 10 seconds
Battery Cell :5-18NC/2-6Lipo
Weight :60g
Size :34x46x12mm(LxWxH)
Features: Supports high RPM motors,can be used with most of the motors in the rc market
Secondary sub-menu setting ,is easier to be programmed
Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
Super smooth and accurate throttle linearity
Power arming protection (prevents the motor from accidentally running when switched ON)
Auto throttle shut down in signal lose situation
Safety thermal over-load protection, when the temperature of ESC exceeds 110 deg C,the ESC will reduce the output power to allow it to cool
Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
New Advanced programming software
EnErG Pro B-85 OPTO
Continuous - 85A (Burst - 100A)
Weight - 60g
Size - 34x46x12mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC - None
Programmable - Yes (Manually or by Program card not included)
Program Card - 4404970
ENERG PRO B-85 SBEC ESC (85A) (2-6 CELLS)
Output :Continuous Current 85A, Burst Current 100A for 10 seconds
Battery Cell :5-18NC/2-6Lipo
Weight :60g
BEC Output :5.0V,5.5V,6.0V adjustable/5A
Size :34x46x13mm(LxWxH)
Features:Supports high RPM motors,can be used with most of the motors in the rc market
Secondary sub-menu setting ,is easier to be programmed
Adjustable BEC output 5.0V/5.5V/6.0V and Continuous 5A current (supplies the Servo with much stronger power)
Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
Super smooth and accurate throttle linearity
Power arming protection (prevents the motor from accidentally running when switched ON)
Auto throttle shut down in signal lose situation
Safety thermal over-load protection, when the temperature of ESC exceeds 110 deg C,the ESC will reduce the output power to allow it to cool
Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
New Advanced programming software
EnErG Pro B-85 SBEC
Continuous - 85A (Burst - 100A)
Weight - 60g
Size - 34x52x14mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC Output - 5.5V/5A
Programmable - Yes (Manually or by Program card not included)
Program Card - 4404925
Σειρά EnErG-Pro ESC >>>www.modellsport.gr