Επιτελους κατα το καλοκαιράκι θα έχουμε τηλεμετρία..!
Σε καποιες θα εχουμε την τηλεμετρια στην τηλεκατ και σε κάποιες άλλες θα την έχουμε εξωτερικά..!
Πως και πως την περιμένω τώρα με το φωτογραφικο
Απο τα καλύτερα νέα που άκουσα τον τελευταίο καιρό
http://www.robbe.de/content_global/images/robbe-erleben/newsletter/Newsletter_Telemetrie_2011.pdfWith the new radio system in T18MZ
Fall 2011 robbe-Futaba in the home
Telemetry are finding their way. Based on the
FASST system, the bidirectional
comprehensive test ™ - system for the transmission of tele-
metriedaten the models developed for the transmitter.
The new system is called comprehensive test ™, where "est"
for "Advanced Telemetry System" is.
A radio link for control and telemetry data.
The high-end radio gear to control the sending T18MZ
Model 16 +2 and 32 channels can be up to telemetry channels
received. The telemetry data will not only display
displayed, but also acoustically or via voice
printed output. An optional vibration alarm in the
Transmitters are activated.
At the transmitter, the telemetry data are also available in digital
Form and are available via a wireless or
Bluetooth module to a smartphone or a laptop
transferred. This opens up for the greatest-model pilot
flexibility of display and output options.
Other features of T18MZ
The brilliant 6 "HVGA display with touchscreen, LED back-
backlight and contrast is enhanced in bright
Sunlight readable well. Was greatly accelerated the
Reaction time of the touch screen by using a super-
fast microprocessor. The increase in operating time
was on a long operating day reduction achieved by
the power consumption while increasing the battery
capacity at 3500 mA. The battery charging process management in
output assumes the transmitter electronics.
The internal memory is such that images of
Models can be stored in internal memory. The
integrated 0.3 megapixel camera allows the uncomplicated
graced creation of model photos to the then
allocate appropriate memory model. In addition to the
known storage on SD card, a USB stick as
Storage medium used and the data via USB
Cable in the PC are stored. Via the USB port
can alternatively keyboard and mouse for menu control
be used.
At the transmitter, a connector is to
Programming of S-BUS servos and registration of
Telemetry sensors on the system. The best menu setup
tion of the T-14 was around the menus for S-BUS-power,
S-BUS-gyro, camera and telemetry display expanded.
The new, extremely precise joystick use
Industriepotis, characterized by a lifetime of more
characterized as one million cycles.
Page 2
Sensors
Other sensors, such as a simple sensor for Vario
Small models, a pro-Vario-resolution sensor with precise
by Vario and height and a GPS sensor for altitude and
Speed measurement, in addition to other current
and voltage sensors, sensors for Restkraftstoffanzei-
GE, flow, temperature, individual cell voltage, the
Telemetry sensors offer robbe / Futaba round.
What's new with remote control and telemetry equipment?
R7008SB comprehensive test ™
The heart of the comprehensive test ™ system is the
R7008SB new receiver with integrated
Telemetry transmitters.
It is designed for connecting up to eight standard PWM
Servos (analog or digital) designed. With two receivers
Up to 16 channels can be received. On S-BUS
All output channels are also available in digital form-
tion. There, right up to 18 servos or via S-BUS
Be connected with an adapter and standard PWM servo.
Automatically when connecting the receiver, the
important data such as telemetry receiver battery voltage,
an external voltage (60 V) and the Antennensig-
nalstärke transferred to the transmitter. On S-BUS 2 - Input
the telemetry sensors and / or bidirectional
working-RC components connected.
The S-BUS 2 - port receive these RC components
th their control and send signals over the same line
Telemetry data to the transmitter. A receiver for all
No further
Additional equipment required on the receiver!
Impressive are the small size of
47.3 x 24.9 x 14.3 mm and only 13 grams. Perfect both
for narrow hulls and large sailing competition models.
Roxxy BL-control knobs (S-BUS2)
A part of this new S-BUS 2-RC components are
new S-BUS Roxxy BL-control knobs. You will be after
Registration and automatically port on the S-BUS2
Telemetry data speed, current and voltage to the transmitter
. transmit This will almost sensorless digital future
Reality without additional sensors and wires and without
Additional costs.
After the launch of the fall of 2011 T18MZ
little by little, all FASST transmitter as T8FG,
FX-20, T12FG, FX-30, etc. gradually to the new
comprehensive test ™ system changed. The new facilities would
both the FASST system and the FHSS system
Modulation provide. This is to-
ensure that existing FASST receiver in addition
be operated with the RC system with telemetry
can. The telemetry data is displayed on the display,
or alternatively and sound output, and probably
Lich and voice output via the headphone jack
issued. This feature is of course only in the
Modulation comprehensive test available.
Figure example
Page 3
Wi-Fi, Bluetooth phone, laptop and telemetry
As a universal telemetry unit, the output
Smart-phone use. The data are transmitted via wireless
Bluetooth module or transferred to the smartphone, the
Voice and tone, vibrating alert and a display
possesses. The smartphone is the optimal output
unit for telemetry data. Thus, the telemetry data
gleichzeitigt output on various devices (eg
Helpers, announcer, timekeeper, etc.)
Wlan or Bluetoooth can Telemetriedeaten
also to a laptop / notebook will be sent with the
necessary software, which telemetry data to
the monitor displays a large area. For events and
Competitions, the telemetry values as RGB or
HDMI port on the netbook / laptop through a large
Flat panel monitor or display to the spectators
be.
How does the conversion on telemetry at
existing FASST systems?
Existing systems can FASST with a new
Recipient (R7008SBHybrid), the control signals FASST
receives the telemetry data as a comprehensive test-signal ™
Telemetry receiver box to send. In principle this is similar
The receiver R70008SB (as described above), is
However, as FASST / comprehensive test-signal hybrid-combination
designed.
Telemetry box
For the reception of telemetry data, the telemetry box
offered, equipped with a receiver and lithium
Battery. The telemetry data received at the display
and displayed either by sound or voice output
issued.
By means of the telemetry receiver and R7008SBHybrid
autaken the telemetry box, all existing
FASST transmitter and RASST and plants with FASST or
RASST modules are converted to telemetry.
robbe model sports team in June 2011
Aeromodelling GR 
E-mail 
309.903 μηνύματα σε 12.394 θέματα από 6.318 Μέλη / Τελευταίο μέλος: Clubdim
Περιεχόμενα
Μέλη
Σύνολο μελών: 6318
Στατιστικά
Συνδεδεμένοι χρήστες
Αρχική
Forum
Album
Βοήθεια
Αναζήτηση
Ημερολόγιο
Σύνδεση
Εγγραφή
