Τ/Κ FS-TH9X ME NEO ΔΕΚΤΗ

  Καταστήματα
  Κεντρική σελίδα
  Αρθρα
  Links
  Σύλλογοι
  Γιατί αυτή η σελίδα;

WWW Aeromodelling GR

Aeromodelling GR - IBabylon ThemeClassic YaBB SE ThemDelta TPNetBiz TPOmega TPSMF Default Theme

[DJM]

ΓΕΙΑ ΣΑΣ ΠΑΙΔΕΣ

Μήπως ξέρει κάποιος να με βοηθήσει στο πώς μπορώ να συγχρονίσω την παρακάτω τ/κ


με ένα νέο δέυτερο δέκτη Ίδιου τύπου που αγόρασα?

στο μάνουαλ δεν ανεφέρετε κάτι

[asterixx25]

Διάβασε λίγο εδώ μήπως βοηθηθείς.

http://www.aeromodelistis.com/smfgr/index.php?topic=5071.msg53673#msg53673

[DJM]

ΣΕ ΕΥΧΑΡΙΣΤΩ!!!
ΘΑ ΤΟ ΔΩ ΚΑΙ ΣΑΣ ΛΕΩ....

[nikosd]

Αντιγραφή απο το Forum του Hobbyking
Ελπίζω να σε βοηθήσει ι

I received additional receivers for the TGY 9X V2. The case is different, does not come with the hole in the side (this hole came at the receiver provided with radio). After several attempts to bind the receiver I had success with the method below.
 
a) radio transmitter and receiver turned off.
b) connect the bind cable on the "channel 9" of the receiver (before the last channel of the receiver).
c) press and hold the button "bind range test" located in the transmitter module (behind the radio transmitter).
d) turn on the radio transmitter.
e) Connect the cable battery on the channel 10 (the last channel of the receiver).
f) the receiver's red LED should be bright (not flashing).
g) Disconnect the battery and bind cables from the receiver.
h) release the button "bind range test" located in the transmitter module.
i) shut off the Transmitter.
j) do a test with a servo.

[DJM]

ΑΥΤΟ ΗΤΑΝ