Aeromodelling GR

Dear All,

We had launched a new  Fly CAM DV Video Recorder, Using this product in criminal activities is strictly prohibited, or else at your peril.

Features
-Resolution: 640*480; stable follow shot; real AVI-format files with good recording effect, can be played by any video player. When the battery is exhausted, the video/sound in recording will be stored automatically before shutdown, no worries about data lost.
-Switch ON/OFF: turn on (ON) and shut down (OFF)
-Pressing the round button for 1 second first,then select DV video recording by the “hold” key,push it up,the blue light will flash (video recording is started) if pressing the round button once; pressing it twice will stop the flashing of blue light (video recording is stopped and the video is stored).If you want to take a photo,Select CAM recording by the “hold” key,and push it down, the yellow light will flash ,(photo recording is started )if pressing the round button once; pressing it twice will stop the taking(photo recording is stopped and the photo is stored).

-SD card: insert ID card according to the ID insertion diagram of CAM-V2, the SD card whose capacity is no more than 8G is allowed.
-Charging: charging is started when inserting the USB interface into a computer; switching off CAM-V2 will enable charging to be finished more quickly; the red light is shut down when charging is finished.
-USB connection: in the mode of DV, the CAM will appear as a U disk in computer through USB connection, and a direst access to its content is allowed. In the mode of REC, access to its content is forbidden (online upgrade of extended function is reserved)

Product Details
-Size: 72mm * 20mm * 11mm
-Weight: 15g
-Storage: small SD card / T-FIASH (2~8G)
-Battery: built-in 300mAh lithium battery, 2-hour battery life for each charging
-CAM: 1.3 Mega Pixels
-Recording format: AVI
-Video file: approx. 25MB per minute
-Video file time: 1 hour for the 2G SD card (included)
-CAM: 1.3 Mega Pixels
-Record Format: AVI (352x288)
-Memory: mini SDT-FIASH(128MB-8GB)
-Built in MIC
-Recommended Max Range for Objects: 2~3 Meters (Audio 1~2 Meters)
-Power Source: Built in Rechargeable Li-ion Battery (recharge directly from USB port)
-Up to 3 hours recording with one charge
-Continuous recording until memory is full or manually shut off
-User Manual
-Temperature：5C to 50C
-USB Cable 
-Manufacturer and Origin: China
-Accessories:USB 、Charger
Item Packing
-Fly CAM DV Video Recorder x 1 

For more R/C product details, Welcome to visit www.rc-fans88.com.

If you have any enquiry, please feel free send email to :rcfans88@gmail.com.

Hi,

WWW.RC-FANS88.COM had launch Hobbywing Platinum ESC for Airplane and Helicopter with good price.
Hobbywing Platinum-40A  http://www.rc-fans88.com/details.asp?prodid=1430
Hobbywing Platinum-80A  http://www.rc-fans88.com/details.asp?prodid=1432
Hobbywing Platinum-120A-HV ESC  http://www.rc-fans88.com/details.asp?prodid=1436
Hobbywing Platinum-150A-OPTO   http://www.rc-fans88.com/details.asp?prodid=1434
Hobbywing LED Program Card For Brushless ESC (Version 2.0)   http://www.rc-fans88.com/details.asp?prodid=1438

If you interested in them, Please feel free to contact rcfans88@gmail.com. We will offer good price to you.

KDS 800 AVCS Dual Rate Digital Gyro for heli almost like Futaba GY401, But with very good price.

http://www.rc-fans88.com/details.asp?prodid=1062

Feature

-Minimizes changes in an aircraft's attitude by wind etc

-Angular acceleration commands used

-Sensor vibration proofing

-Simple sensitivity adjustment

--KDS800 Very High Quality AVCS Heading Hold Gyro

Product Details

-Dimension (mm): 28*28*20

-Digital proportional R/C system

-Operating voltage: 4.8V~6V

-Operating temperature: -10? ~ +45?

-Operating current: 80A


Item Packing

-KDS 800 AVCS Dual Rate Digital Gyro x 1

-English Manual x 1

Xerun  120AESC+Motor 6.5T+Program Card Combo For 1/10
http://www.rc-fans88.com/details.asp?prodid=1455

Features
-Compatible with all sonsorless brushless motors and most of sensored brushless motors such as LRP, Novak, Orion, Feigao, etc.
-Seamlessly change to sensorless working mode when the sensor cable is broken.
-Lithium battery and NiMH battery supported.
-Excellent start-up, acceleration and linearity features.
-Firmware can be upgraded through an USB adapter on the Advanced Professional LCD Program Box (Optional  equipment).
-User programmable.  Easily programmed with only one button on the ESC and compatible with the 3 Digital LEDs Program Card and the Advanced Professional LCD Program Box.
Product Details
-Output: Continuous current 120A, burst current 760A.
-nput: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.   Note1
-BEC Output: 5.75V@3A linear mode built-in BEC.
-Resistance: 0.0003 Ohm.
-Motor Supported: Sensored brushless / Sensorless Brushless.
-Suitable Brushless Motor: 
With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road:  >=5.5T
With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road:  >=8.5T   
-Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for competition race.
1/10, 1/8 rock crawler.1.8
-Size: 43mm(L) * 36mm(W) * 33mm(H).1.9
-Weight: 65g(Without wires) 
-KV:5200
-Main Application: 1/10 On-road normal race or 1/10 Off-road competitive race (Modified group)
-Diameter:35.8mm
-Length (Without Shaft):52.5mm
-Shaft:3.17mm
-Shaft Length:15mm
-Weight:200g
-Special Notes: Fixed Timing

Note1:
-For brushless motor, the ESC supports up to 9 cells NiMH or 3 cells Lipo battery.
-For 4-6 cells NiMH or 2 cells Lipo: You need not change the cooling fan coming with the ESC;
-For 7-9 cells NiMH or 3 cells Lipo: You must change the standard cooling fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V)

Item Packing
-Xerun120A (Version2.0) brushless ESC with cooling fan x 1
-6.5Tsensored brushless motor x 1
-3 Digital LEDs program card x 1

Hobbywing Platinum-120A-HV ESC for Trex 600

http://www.rc-fans88.com/details.asp?prodid=1390

Platinum-120A-HV ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter.

1  Typical Applications

1.1 Super powerful  for 600 class helicopter (Working with 8 or 10 cells Lipo battery)

1.2 Very powerful for 700 class helicopter (Working with 10 or 12 cells Lipo battery)

1.3 Super powerful for large scale aircraft such as F3A

2  Specification

2.1 Output:  Continuous 120A, burst 180A up to 10 seconds.

2.2 Input Voltage:  5-12 cells lithium battery or 15-36 cells NIMH battery.   

2.3 BEC:  None.

2.4 Control Signal Transmission: Optically coupled system.

2.5 Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.

                               (BLM: BrushLess Motor)

2.6 Size:  88mm (L) * 55mm (W) * 15mm (H).

2.7 Weight:  125g.

3  Features

3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.

3.2 Wide-open heat-sink design to get the best heat dissipation effect.

3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.

3.4 Smooth, linear, quick and precise throttle response.

3.5 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.

3.6 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference.

3.7 Perfect governor mode for helicopter. 

3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.

3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

Hobbywing SeaKing-35A Brushless ESC for Boat
http://www.rc-fans88.com/details.asp?prodid=1075

Features
-Use top quality electronic components to enhance the current endurance ability of the ESC.
-Special designed for RC boat, with excellent start-up, acceleration and linearity features.
-With water cooling system.
-The whole ESC is waterproof.
-With 2 running modes ("Forward Only" mode and "Forward/Backward" mode).
-With brake function.
-With 8 steps of timing adjustment to get the best compatibility with various of motors.
-2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / -Over-heat protection / Throttle signal loss protection.
Product Details
-Output: Continuous current 35A, burst current 190A.
-Input: 4-12 cells NiMH/NiCd or 2-4 cells LiPo.   Note1
-BEC Output: 6V/1.5A.
-Resistance: 0.0015 Ohm.
-Motor Supported: Sensorless Brushless Motor
-External  diameter of the water cooling pipe: 4.0mm
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 30g(Without wires)

Note1:
 For 4-9 cells NiMH/NiCd or 2-3 cells Lipo: You needn’t change anything of the ESC.
 For 10-12 cell NiMH/NiCd or 4 cell Lipo: You must disable the output of built-in BEC, and use a 3A UBEC to supply the receiver.

Item Packing
- Seaking-ESC-35A

Xerun 120AESC+Motor 5.5T+Program Card Combo For 1/10

http://www.rc-fans88.com/details.asp?prodid=1454

Features
-Compatible with all sonsorless brushless motors and most of sensored brushless motors such as LRP, Novak, Orion, Feigao, etc.
-Seamlessly change to sensorless working mode when the sensor cable is broken.
-Lithium battery and NiMH battery supported.
-Excellent start-up, acceleration and linearity features.
-Firmware can be upgraded through an USB adapter on the Advanced Professional LCD Program Box (Optional  equipment).
-User programmable.  Easily programmed with only one button on the ESC and compatible with the 3 Digital LEDs Program Card and the Advanced Professional LCD Program Box.
Product Details
-Output: Continuous current 120A, burst current 760A.
-nput: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.   Note1
-BEC Output: 5.75V@3A linear mode built-in BEC.
-Resistance: 0.0003 Ohm.
-Motor Supported: Sensored brushless / Sensorless Brushless.
-Suitable Brushless Motor: 
With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road:  >=5.5T
With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road:  >=8.5T   
-Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for competition race.
1/10, 1/8 rock crawler.1.8
-Size: 43mm(L) * 36mm(W) * 33mm(H).1.9
-Weight: 65g(Without wires) 
-KV:6000
-Main Application: 1/10 On-road normal race or 1/10 Off-road competitive race (Modified group)
-Diameter:35.8mm
-Length (Without Shaft):52.5mm
-Shaft:3.17mm
-Shaft Length:15mm
-Weight:200g
-Special Notes: Fixed Timing
Note1:
-For brushless motor, the ESC supports up to 9 cells NiMH or 3 cells Lipo battery.
-For 4-6 cells NiMH or 2 cells Lipo: You need not change the cooling fan coming with the ESC;
-For 7-9 cells NiMH or 3 cells Lipo: You must change the standard cooling fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V)
Item Packing
-Xerun120A (Version2.0) brushless ESC with cooling fan x 1
-5.5Tsensored brushless motor x 1
-3 digital LEDs program card x 1

Corona 2.4G RF Module & Receiver for Futaba

http://www.rc-fans88.com/details.asp?prodid=1470

Features
-Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.
-Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz  adheres strictly to Frequency-Hopping Spread Spectrum (FHSS) communication standards by constantly switching across a wide band of frequencies. Combining Corona’s software with FHSS we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available. 
Features of Corona 2.4GHz transmitting module and receiver
The new lightweight, advanced technology unit has the following features:
-Extended operating range 1.5 km range, which has been tested in a real flying environment.
-A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.
-One-key user friendly setup mode.
-Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.
-The unique receiver design makes the Corona module easy to install and ensures reliability.
-Corona's advanced needle design ensures the lightest possible receiver
-By following these steps you will ensure your transmitter and receiver are properly setup and ready to fly.
1. Turn the transmitter on and adjust your transmitter to PPM mode and then turn the transmitter off.
2. Press and hold the programming button on the transmitting module,turn the transmitter on,then you can release the button.(Attention: Not keep hold the button down over 3 seconds,or its ID will change randomly) The LED on Module will flash between red and green indicating the transmitter is ready to bind with the receiver
4.Power on the receiver(s) without pressing any button,then power up the transmitter also without pressing button, the LED on the transmitter light yellow. The RF-link will normally connect in 15~20 seconds between transmitter and the receiver(s).If linked the LED on the receiver(s) will light red without any flash indicating the receiver(s) is operating properly. If the LED flashes sometime or does not light at all. Repeat this step until link is connected properly.
After set up receiver and transmitter,user only take the 4th step in normal flying.
We hope you enjoy your new 2.4 Ghz receiver and transmitter modules. They have been designed and produced using the highest quality control measures available.  If you have any questions please do not hesitate to contact us or visit our website. 
Range checking
This is necessary for safe operation and must be incorporated into your setup and pre-flight operations. 
Failsafe setting for receiver
When RF linked between transmitter and receiver(LED on receiver light on,and all servos  under controll)
Caution must be exercised when using the unit in an environment that consists of  metal fences, concrete buildings, or rows of trees.  In this environment you may experience unexpected radio wave multipath interference.
You must conduct a range check as follows (Note this is done with the receiver out of the plane):
1. Place the receivers at least two feet (60cm) above non-metal contaminated ground; for example a wooden bench.
2. Fix the antenna of receiver horizontally. Don’t let antenna touch the ground.
3. Connect a servo to channel one.
4. Place the antenna of the transmitter in a vertical position.
5. Turn on the transmitter and receiver and walk away from receiver while moving the stick which controls channel one. Ask someone to check the distance at which the servo doesn’t respond.
Attention: Controlling distance is greatly related to the transmitter power, please use freshly charged battery packs when you conduct the test. Controlling distance is affected by environment too. Please test it in the open away from any obstacles. The controlling distance in the air is greater than that on the ground. Our controlling range is based on a conservative ground test.
Product Details
-Type: Futaba Combo
-Size: 58.5x37.5x22mm(2.3"x1.47"x0.86")
-Weight: 29g
-Operating voltage: 6V-13V
-Operating current: 100mA
-Output Power: <10mW
-Resolution: 1024
-Compatible with: FUTABA: 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. HITEC: Optic 6, Eclipse 7. WFLY: WFT09 WFT08 

Item Packing
-CT8F x 1
-CR8D x 1

Το εχει δοκιμασει κανεις? Εγω εχω μια OPTIC 6 εχει διαφορα με την Futaba?

   Αν ξεκινήσεις από το πρωί να παντρεύεις πομπό με δέκτη πότε ανοίγοντας πρώτα τηλεκατεύθυνση και μετά δέκτη και πότε το ανάποδο και περιμένεις κάθε φορά και καμιά τριαντεριά δευτερόλεπτα τότε εκεί κατά το μεσημεράκι θα πετάξεις.  :laugh: :laugh: :laugh: . Οσο για το FHSS καμιά σχέση με το   FASST των μόντουλ της futaba.
   Εντάξει είναι φτηνό αλλά απλά φτηνό.



Φιλικά Κώστας.

Fitec 9650 Servo 25g for 450/500 Helicopter

http://www.rc-fans88.com/details.asp?prodid=1449

Features
-Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter
Product Details
-Weight：25g
-Size：36*15.2*29mm                   
-Speed ：4.8V: 0.10sec/60°
-Speed ：6V: 0.07sec/60°   
-Stall Torque ：4.8V: 2.0 kg/cm
-Stall Torque ：6V: 2.2 kg/cm
-Operating Voltage：4.8-6Volts 
-Tail Lock
Item Packing
-Fitec 9650 Servo 25g  for 450/500 Helicopter x 1

-Spare Parts x 1 set

Fitec 9257 Servo 25g for 450/500 Helicopter  USD9.62 only

http://www.rc-fans88.com/details.asp?prodid=1448

Features
-Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter
Product Details
-Weight：25g
-Size：36*15.2*29mm                   
-Speed ：4.8V: 0.09sec/60°
-Speed ：6V: 0.07sec/60°   
-Stall Torque ：4.8V: 2.0 kg/cm
-Stall Torque ：6V: 2.2 kg/cm
-Operating Voltage：4.8-6Volts 
- Head Lock
Item Packing
-Fitec 9257 Servo 25g  for 450/500 Helicopter x 1

-Spare Parts x 1 set

PG800 Gyro and LCD Setting cart for T-rex 500/T-rex 600

http://www.rc-fans88.com/details.asp?prodid=1486
Features
 

-Performance specification:

- Better than Futaba GY401, same grade with Futaba GY611
- Identical design with another famous Gyro(you'll know which one I'm talking about on google), they share almost same performance, but with 1/2 of the price
- PG-800 is designed for model helicopter with high accuracy, it gives you the highest standards of operational performance in affordable price.
- It provides greatly consistent yaw rates that avoid outside variables like the helicopter's rotor head speed, rotor disc loading, flight speed, wind, etc. with the aids of a premium quality sensor and a powerful controller
- PG-800 enables you to enjoy a high performance by its excellent location capability and precision
- It is compatible with mini electric helicopter and the 90 class nitro helicopter
- It supports for varied special digital servos
- You can update your configurations by the LCD Programmer
-PG-800 is designed for model helicopter with high accuracy, it gives you the highest standards of operational performance in affordable price.
-It provides greatly consistent yaw rates that avoid outside variables like the helicopter's rotor head speed, rotor disc loading, flight speed, wind, etc. with the aids of a premium quality sensor and a powerful controller.
-PG-800 enables you to enjoy a high performance by its excellent location capability and precision.
-It is compatible with mini electric helicopter and the grade 90 helicopter.
-It supports for varied special digital servos.
-You can update your configurations by the LCD Programmer.

Product Details
 
-Working voltage: 4~10V, current﹤60mA
-Overall dimension: 29.5mm×28mm×12.7mm
-Weight: 17.5g
-Working condition: -10~60℃
-Control actuator compatibility: 1520uSec and 760uSec digital servos at 333Hz and 250Hz


Item Packing
 
-PG-800 Gyro
-LCD Programmer
-Programmer Adapter Cable
-Sticker
-Instruction Manual (English)

Get Ignited With 3-in-1 iBEC-6A  USD26.2

http://www.rc-fans88.com/details.asp?prodid=1554

Features
-The integral parameter for the spitfire won first in its class in World War Ⅱ. This fighter is a beautiful design that is much sought after with passion by the model hobbyist. The fly circle is vivid with excellent maneuverability and control making it a fighter that is easy for the beginner through to the more advanced hobbyist to fly.
Product Details
-Wingspan: 880mm/34.6in
-Length: 820mm/32.3in
-Weight: 680g/24 oz
-Motor: Brushless Motor C4038-15       
-Battery: LI-PO 11.1V,1300 mAh
-R/C System: ETB41-2.4GHz
-ESC: 20A Brushless ESC
-Servo: 9gx4
Item Packing
-Spitfire Propeller Airplanes 2.4G RTF x 1

DLE30 30cc Gasoline Engine
Features
-New DLE30 30cc Gasoline Engine
Product Details
-3.7HP/8500rpm
-Idle Speed: 1600rpm/min.
-8.5KG Pulling Force/ 100 meters Altitude
-7.5KG Pulling Force/1800 meters Altitude
-The specification of the aircraft propeller:  18*8  18*10 19*8  20*8
-The type of the sparking plug: NGK CM6
-Exhaust Amount: 30.5cm3
-Diameterx stroke:36mm*30mm
-Ratio of compression: 7.6:1
-Ratio of lubricating capacity: 30:1
-Weight: Main engine-910g. Exhaust Pipe-60g
-Ignition equipment-120g
Item Packing
-DLE30 30cc Gasoline Engine x 1

If anyone interested in them, Please feel free to contact me

Best Regards
Jessica
www.rc-fans88.com

Δηλαδη Κωστα,

δεν αξιζει η αγορα ενος τετοιου συστηματος "εναντιον" του αντιστοιχου fasst της Futaba?

Εχω την καινουρια 10C...και το αντιστοιχο module για την δικη μου ,της Futaba κοστιζει εναν σκασμο λεφτα.

   Το "εναντίον" μου άρεσε...Καμια σύγκριση. Στη φουτάμπα από τη στιγμή που έχεις παντρέψει πομπό με δέκτη ,ανοίγεις πομπό και μετά δέκτη όπως ήξερες και στα 35ΜΗΖ και τέλος. Ούτε περίεργες διαδικασίες ούτε τίποτα. Ούτε κάθε φορά που αλλάζεις μοντέλο πρέπει να έχεις όλα σου τα μοντέλα παρατεταγμένα για να ξανακάνεις bind σε όλα. Αυτό είναι γελοίο ή μάλλον απλά απαράδεκτο. Οσο για την εκκίνηση, αν κάνει η κορόνα τα συνηθισμένα της κόλπα και χρειαστεί rebind, άντε να λύνεις το αεροπλανο για να φτάσεις στο δέκτη. Κι αν εμφανίζει τέτοιες δυσκολίες στην εκκίνηση, ποιος εγγυάται ότι αν για οποιοδήποτε λόγο ψιλοχάσει το σήμα, θα το ξαναβρεί και δεν θα χάσει τελείως την μπάλα?
   Ακουσε φίλε μου,όταν έχεις κάποιο ή κάποια σοβαρά μοντέλα τις τσιγκουνιές τις κάνεις αλλού και όχι στην τηλεκατεύθυνση ούτε στους κινητήρες ούτε στα σερβό. Είναι προτιμότερο να έχεις λιγότερα και μικρότερα αεροπλάνα ,για να σε παίρνει το πορτοφόλι σου να τα εξοπλίσεις σωστά  παρά να στήνεις δίμετρα και τρίμετρα με "οικονομίες" και "υποκατάστατα" ,που καποια στιγμή θα σου κοστίσουν πολύ ακριβά. Και μην ξεχνάς ότι ,τα αεροπλανα έρχονται και παρέρχονται ενώ η τηλεκατεύθυνση είναι κάτι που θα έχεις για πολλά χρόνια, αν κάνεις σωστή επιλογή και όχι φτηνοπράγματα.
    Από κει και πέρα ότι γουστάρει κάνει κανείς με τα ευρά του. Εγώ όμως είμαι πάντα της νοοτροπίας των καλών πραγμάτων και μέχρι τώρα δεν βγήκα ζημιωμένος.

Bρε Κωστα,
συνονοματε,

δεν μου αρεσε αυτη σου η φραση :

"Είναι προτιμότερο να έχεις λιγότερα και μικρότερα αεροπλάνα ,για να σε παίρνει το πορτοφόλι σου να τα εξοπλίσεις σωστά  παρά να στήνεις δίμετρα και τρίμετρα με "οικονομίες" και "υποκατάστατα" ,που καποια στιγμή θα σου κοστίσουν πολύ ακριβά. "

Ειμαι φοιτητης στο ΕΜΠ,
και αν ΔΕΝ κανω οικονομια και ΔΕΝ κραταγα τα λεφτα μου για καιρο,

τοτε καταλαβαινεις οτι ουτε 10C θα εβλεπα,
ουτε Giant SuperSportster 81in φτερο,
ουτε OS 160 FX,

ουτε ουτε ουτε....

Ειναι διαφορετικα τα πραγματα οταν εχεις παρει πτυχιο,εχεις πιασει μια δουλεια που να ανταποκρινεται στις προσδοκιες σου και να σου προσφερει καθε μηνα καποιο χρηματικο ποσο που μπορεις να διαχειριστεις αναλογα,

παρα οταν εισαι φοιτητης και κρατας το χαρτζιλικι σου για μηνες ωστε να παρεις κατι που να σε ικανοποιει.

Οπως καταλαβες,
απο τα "καλουδια" που εχω,δεν τσιγγουνευτικα ποτε λεφτα,
θα μπορουσα πολυ ευκολα,
αντι να δωσω 300ευρω για τον 160FX,
να παω να παρω εναν ASP ή Magnum.... :laugh:

Αλλά δεν το εκανα...


Οσο για το module/Rx της Corona,

περισσοτερο πληροφοριακα ρωτησα αφου εκει που πεταω δεν εχει υπαρξει ποτε προβλημα με συχνοτητες,
ουτε με αλλα μελη του club,
ουτε γενικα καποια παρεμβολη!

Δεν με απασχολει δηλαδη τοσο πολυ το θεμα των 2.4G που αποτελει αιτια του "πανικου" που εχει πιασει πολλους φιλους μοντελιστες!

Με εκτιμηση,

Κωνσταντινος

Αγαπητέ Κωνσταντίνε το θέμα των παρεμβολών μπορεί να σου προκήψει από το πουθενά. Εγώ πριν από μερικές μέρες έχασα αεροπλάνο στο αεροδρόμιο της Σπάρτης πάνω στην προσγείωση από το πουθενά. Μπορεί να ήταν κάτι άλλο αλλά μπορεί να ήταν και αυτό.... Δεν υπάκουσε την τελευταία στιγμή και το είχα πάνω από 10 χρόνια με το ίδιο setup. Πόσοι μοντελιστές είμαστε εδώ; Ενεργοί 4-5 και στο αεροδρόμιο εκείνη την ώρα 2 άτομα. Άρα επειδή δεν ξέρεις τι μπορεί να σου τύχει και απο πού και επειδή το θέμα ασφάλειας συχνοτήτων είναι πρωτεύον πρέπει να το εξετάσεις καλύτερα και να το εξαντλήσεις θα έλεγα στο μέτρο που μπορείς.
Ο bladekiller νομίζω ότι θέτει το θέμα στη σωστή του βάση με την οποία συμφωνώ και εγώ, και γράφω τις απόψεις μου σε άλλο παρόμοιο θέμα που συζητείται παράλληλα ( https://www.aeromodelling.gr/ForumS/index.php?topic=11908.msg110886;topicseen#new )
Οποσδήποτε όμως η επιλογή είναι καθαρά δική σου....

   Μάλλον δεν κατάλαβες τι θέλω να σου πω. Οταν λέω "οικονομίες" δεν το εννοώ με την έννοια που νομίζεις και γιαυτό υπάρχουν και τα εισαγωγικά. Το λέω με την έννοια της χρήσης φτηνών και αμφιβόλου καταλληλότητας πραγμάτων.
   Οσο για τα περί πανικού εγώ δεν ξέρω ούτε με ενδιαφέρει τι κάνουν οι άλλοι. Επέλεξα ένα συγκεκριμένο σύστημα για συγκεκριμένους λόγους και όχι από καταναλωτικό πιθηκισμό.

Για να δώσω ώθηση στο φίλο Mirage θα αναφέρω ότι εγώ το βήμα προς τα 2.4 το έκανα. Σήμερα αγόρασα το TM-8 της Futaba ( http://www.heliland.com/catalog/index.php?main_page=product_info&cPath=140&products_id=1703 ) μαζί με τον R617FS ( http://www.heliland.com/catalog/index.php?main_page=product_info&products_id=1407 ο Διαμαντής τον έβαλε σε πολύ καλή τιμή) και νομίζω ότι μπορώ να έχω το κεφάλι μου ήσυχο από δω και πέρα....

DLE 222 4 Cylinder Gas Engine

Features
-New DLE 222 4 Cylinder Gas Engine

Product Details
-Perfomance:21.5hp/7500rpm
-Idle Speed:1000rpm/min
-Propeller:32*10 /32*12 /34*10
-Sparking Plug:NGK CM6
-Exhaust Amount:222.5cm3
-Diamete x Stroke :45mm x 35mm
-Ratio of  Compression:7.6 x 1
-Ratio of  Lubricating :30 x 1
-Net Weight:4950g
-Gross Weight;5610g
Item Packing
-DLE Gasoline-engine 222 For Model Airplane x 1

http://www.rc-fans88.com/details.asp?prodid=1756

New Fitec 9257 Digital Servo 25g For T-REX
450/ 500 Helicopter

http://www.rc-fans88.com/details.asp?prodid=1787
Features
- Fitec has newly introduced digital servo specifically for small and medium sized electric helicopter. This servo has a very high speed and precise controling performance.It can be applied to 450-600 level electric helicopter. At the voltage of 4.8V,it can reach 0.09s/60 ° high response rate and up to 2 kg of torque, its performance is similar with the FUTABA 9257
Product Details
-Weight：25g
-Size：36*15.2*29mm                   
-Speed ：4.8V: 0.08sec/60°
-Speed ：6V: 0.07sec/60°   
-Stall Torque ：4.8V: 2.0 kg/cm
-Stall Torque ：6V: 2.2 kg/cm
-Operating Voltage：4.8-6Volts

New DLE30 Gasoline Engine (Rear Carb)
Features
-3.7HP/8500rpm
-Idle Speed: 1600rpm/min.
-8.5KG Pulling Force/ 100 meters Altitude
-7.5KG Pulling Force/1800 meters Altitude
-The specification of the aircraft propeller:  18X8  18X10 19X8  20X8
-The type of the sparking plug: NGK CM6
Product Details
Parameter:
-Exhaust Amount: 30.5cm3
-Diameterx stroke:36mmX30mm
-Ratio of compression: 7.6:1
-Ratio of lubricating capacity: 30:1
-Weight: Main engine-910g. Exhaust Pipe-60g
-Ignition equipment-120g
Item Packing
- New DLE30 Gasoline Engine (Rear Carb) X 1 Set

KDS Flymentor 3D
http://www.rc-fans88.com/details.asp?prodid=1715

Features
Control all movement,including attitude stabilization, speed control, position locking.
CCD sensor tocapture picture of ground, comparing pictures to avoid drifting.

Switch workingmode (horizontal mode and position mode) through AUX channel.

Integrating headlocking gyro and swashplate mixer.

Controlsensitivity and mode of internal gyro through GEAR channel.

Support swashplate3S 120º, 3S 140º, 4S 90º, 4S 90º+45º

Keep balance ininverted flight.

Configure bycomputer through USB.

If you are using FM/PPM remote control device, whenhelicopter is out of control, the Flymentor 3D will set aileron, elevator,rudder to neutral, and keep pitch in the final signal position, and switch topositioning mode automatically, the sensitivity is 70%.

Product Details
 

Item Packing
- KDS Flymentor 3D x 1 set

RCGF20RI 20cc Petrol or Gas Engine for RC Airplane( Rear Induction)
http://www.rc-fans88.com/details.asp?prodid=1791
Features
-RCGF20RI 20cc Petrol or Gas Engine for RC Airplane( Rear Induction)
Product Details
Parameter:
-Type : 2 cycle piston valve type gasoline engine for airplane only
-Displacement (cc) : 20cc
-Bore x Stroke (mm): 30mm*28mm
-Carburetor: Walbro pump (made in Japan) & diaphragm butterfly valve type (made in China)
-Ignition : DC-CDI (computer controlled auto advance, electronic ignition system)
-Power supply: 4.8 - 6V
-Maximum output: 2.2hp/ 1.64KW
-Speed range: 1500 to 9800RPM
-Gasoline version: pre-mixed fuel, 25-40 gasoline :1 (90 octane gasoline)
-Weight (with ignition & muffler): 1080g
-Weight (without ignition & muffler): 830g
-Propeller: 15x 6 9500RPM/ 16x 6 9000rpm (standard two leafs prop)
Item Packing
Includes:
-1 x engine
-1 x Walbro carburetor
-1 x muffler
-1 x CDI
-1 x glow plug
-4 x standoffs

CRRC GF26i V2 gas engine
http://www.rc-fans88.com/details.asp?prodid=1781
Features
-2 pcs. aluminum crankcase, 2  ball bearings supported crankshaft, 2 needle bearings conecting rod, walbro butterfly type carburetor.
version Auto-advance CDI ignition
Product Details
-Type:2 cycle piston valves type gasoline engine for airplane.
-Displacement(cc):26cc
-Bore x Stroke(mm):34mm*28.6mm
-Dry Weight:900g/1.98lbs. (net weight without ignition)
-Carburetor:Diaphragm butterfly valve type
-Maximum Output:2.42 hps/9000rpm
-Speed range:1800-9500rpm
-Ignition:version CRRC Auto-advaance DC-CDI
-Iis-Ignition:4.8V DC
-Gasoline/oil mixture:Pre-mixed Fuel, 40:1(25:1 for break in)
-Lubrication oil:2 cycle engine oil
-Propeller:16 X 8, 17 X 6, 17 X 8
-Cooling System:Air Cooled
Item Packing
-One Gf26i V2 Gasoline Airplane Engine. 
-Auto-advance CDI Electronic iginition,
-Spark plug,
-Plug wrench, prop
-Flange with washer, 
-Prop bolt,
-Glow type engine mount
-REQUIRES: 2-cycle oil

Super Regulator 12V POWER PANEL Mark II W/IGNITOR CHARGER AT-PX2670
http://www.rc-fans88.com/details.asp?prodid=1928

Features
1.Super regulator design - the stable voltage(1.5v) output can automatically supply the current according to glow plug size to achieve lowest heat dissipation.
2.4 sets of power supplies for:
-12V engine starter
-12V electric fuel pump
-1.5V glow plug
-1.2v glow start charger - with a LED indicator.
-Switch selectable fuel direction also included a push-on/off power switch.
-Include a larger meter that allow you to monitor the current of glow plug easy.
-Has reverse polarity protection.
Product Details
-Super Regulator 12V POWER PANEL Mark II W/IGNITOR CHARGER AT-PX2670
Item Packing
-Super Regulator 12V POWER PANEL Mark II W/IGNITOR CHARGER AT-PX2670

KDS FLymentor 3D Program Card

http://www.rc-fans88.com/details.asp?prodid=2043

Features
KDS flymentor PPC is a device used for adjusting parameters of KDS flymentor. It is easy to use.


Product Details
Connecting Device
Switch on the KDS flymentor (make sure the main motor is disconnected), then plug the connection cable into the USB slot of the KDS flymentor. The flymentor PPC will switch on and you can see the screen shown as below.
After few seconds, the flymentor PPC will finished handshake with KDS flymentor, you can see the main menu on the screen like picture2.

The device type of KDS flymentor is shown in title bar, it is "KDS Flymentor 3D" in the upper picture.

Main Menu
There are nine items in main menu , each item contains a set of settings for flymentor. You can move the cursor to the item you want by press UP and DOWN, press OK you can enter the item and modify the settings. See table 1 for details of them.

You can also press the LOAD/SAVE button here, then the load/save menu will be shown.

Modify Parameters
When you press OK in the main menu, you will enter the settings section for some items, for example, the sixth item, 'Tail Gyro' settings, like the following picture.

In this stage, you can select the parameter by press UP and DOWN, when the cursor is pointed to the value you want to modify, press OK, then the value will be shown as black background like picture 5. If you want to return back to main menu, press ESC.

Then you can modify the value by press UP or DOWN, after modification, press OK, the new value will be saved, or you can press ESC to cancel this modification and the value will be restore.

When you press OK, there will be a star character for few seconds, that means the parameter is being saved.

Load/Save
Press LOAD/SAVE button when in main menu

The load function will copy settings from flymentor PPC to KDS flymentor, the save function will copy settings from KDS flymentor to flymentor PPC opposite.

After selecting load or save, you should choose the memory bank of PPC. There are eight banks in PPC, choose one by moving cursor with UP and DOWN button, then press OK to confirm your select. The star character means the blank is already saved something, otherwise it is empty. Of course you can not load a empty bank.

The SAVE function will overwrite the memory bank you selected without any other operation, but the LOAD function has a confirmation before copy. Use UP, DOWN and OK, ESC button to finish your operation.

Reset to Factory
Choose 'Reset To Factory' in main menu, you will see following screen, if confirmed, the KDS flymentor will be restored to factory settings.

Item Packing
-KDS Flymentor Program Card  X 1
-Connection Cable X 1

-Instruction CD X 1

New DLE170 Gasoline-engine 170CC For Model Airplane
Features
-DLE New Engine DLE170 170CC

Product Details
17.5HP/9000rpm
Idle Speed: 1100 rpm/min
Static Thrust 35Kg / 100 meters Altitude
Static Thrust 31.5Kg / 1800 meters Altitude
The specification of the aircraft propeller: 30 X 12; 32 X 10
the type of the sparking plug：NGK CM6
Exhaust Amount: 170cm3
diameter × stroke: 52mm×40mm
Ratio of compression: 9.5：1
Ratio of lubricating capacity: 30:1
Weight: Main engine - 3550g Exhaust pipe - 200g X 2
Ignition equipment - 160g
Item Packing
-DLE New Engine DLE170 170CC X 1

Παιδιά ξέρει κανείς αν το συγκεκριμένο κατάστημα είναι αξιόπιστο; Επίσης ποια επιλογή από τις τρεις που έχει είναι πιο σίγουρη για ώστε να μην έχουμε στεναχώριες και αιματοχυσίες στο τελωνείο; Η EMS, η Hong Kong Air Mail ή Hong Kong Register Air Mail;
Πρόκειται για μια DLE-30 δύο προπέλες και ένα σέρβο.

Με ΕΜS φιλε μου...

Απο οτι ξερω ειναι καλο αλλα δεν ειμαι και τοσο σιγουρος γιατι δεν εχω κανει εγω ο ιδιος συνναλαγη..!

κανενα προβλημα φιλε βαγγελη....φεραμε μηχανη απο εκει , και ολα μια χαρα....συνιστω ems  ή air parcel registered... :thumbs up: :thumbs up:

Παιδιά ευχαριστώ για την άμεση απάντηση. Φίλε Τόλη θα σε πάρω τηλέφωνο να μου πεις λεπτομέρειες. Ελπίζω τώρα με τα "περίεργα" δέματα να μην έχουμε κανένα επιπλέον πρόβλημα....

Features
-The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious demage would not be caused by slight faulty operation.
-The revolutionary design adds to the structural intensity and the rigidity of the airframe which is even made of EPP material, while ensuring the flight more stable and easier controlled.
-Light-weight design provides optimal Wing loading while ensuring the permanently strength of the craft. This characteristic contributes to the perfect flying performance.
-The composition and the proportion are well matched to provide excellent flying characteristics, while still allowing for precision aerobatic performance and 3D maneuverability.
-Simple design allows for easy access and installation. And all necessary accessories are provided in the package.
-The color schemes are painted with new oil paint which makes the color fresher and permanent.
- Its small size excels at flying on a limited open space, such as park. It also fits into a very small car for transport.
Product Details
 


Wing span：955MM   
Length：945MM   
-Wing area：15.2dm2       
-Weight：480g (without battery)
-Requirements:
-Motor: 2834；2212；2217；950-1100KV Brushless outrunner   
-ESC: 25-30A     
-Battery: 3S 11.1V 1000-1300MAH Li-po               
-Prop:   1047/1147     
-Servo: 1.5-2kg/cm；0.1-0.18sec；（4pcs）
Item Packing
-WM EPP series electric model airplane KIT X 1

Features
-FlySky GT3B FS-GT3B 2.4Ghz 3CH Transmitter w/ Receiver
Product Details
-Channels:3 Channels;
-Model type:car/boat;
-RF range:2.40-2.48GHz;
-Bandwidth:500Hz;
-Band:160;
-RF power:less than 20DB;
-2.4G system:AFHDS;
-Code type:GFSK;
-Senditivity:1024;
-Low voltage warning:yes(less than 9V)
-DSC port: yes(3.5mm:output:PPM);
-ST range:90;
-TH range:45(F:30;B:15);
-Charger port:yes;
-Power:12V DC(1.5AA*8);
-Weight:328g;
-ANT length:26mm;
-Size:159*99*315mm;
-Color:black;
Item Packing
-FS-GR3C Receiver X 1
- CD X 1
-Black Attenna Tube X 1

Features
-Compatible with all sensorless brushless motors and most of sensored brushless motors such as -LRP, SpeedPassion, Novak, Etc.
-Seamlessly change to sensorless working mode when the sensor cable is broken.
-Excellent start-up, acceleration and linearity features.
-Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
-Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

-User programmable. Easily programmed with the "SET" button on the ESC and also compatible -with the digital LEDs Program Card and the advanced professional LCD Program Box.
-3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode)
-4 steps of maximum reverse force adjustment.
-Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
-9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
-8 steps of timing adjustment to suitable for all brushless motors.
-Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

-Red leopard BM-4074-2000KV Class Inrunner Brushless Motor for 1/8,1/5,truck,truggy,and muggy applications
-new design,four-pole rotor,the overall efficiency of more than 90%;
-extremely low temperature without additional heat sink can meet the vast majority of applications;
-compared to competitive products,lighter weight,higher torque;
-use of high-quality materials:aluminum alloy shell fine,high-quality magnetic steel,high temperature wire,imported high-quality bearings;
-rotor using special materials reinforced,high-speed operation under the non-burst phenomenon;
-good heat dissipation ,high overload capacity；
Low electromagnetic interference;
-minimum required electrical maintenance;
-long life

Product Details
Model: XERUN-150A
Dimension: 58mm(L) x 46.5mm(W) x 35mm(H)
Cont. / Burst Current: 150A / 950A
Resistance: 0.0002 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>4.5T, KV<=3000 (Works with 4S Li-Po), =>6T, KV<=2400 (Works with 6S Li-Po)
Battery: 6-18 cells NiMH or 2-6 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/5, 1/8 on-road, off-road, monster, Super powerful applications

Model: BM-4074/2.5Y
Max Amps: 120A
Max Power: 2600W
KV: 2000
Resistance: 0.0062
Air load current(7.4V) :  1.7A
Diameter：mm x length: Φ39.8×73.8
Shaft Length : 20mm
Shaft : Φ5.0
Weight:374g


Item Packing
-Hobbywing Xerun 150A ESC x 1
-Leopard BM-4074-2000KV Motor x 1
-LCD Program Card x 1

Features
-New DLE 222 4 Cylinder Gas Engine

Product Details
-Perfomance:21.5hp/7500rpm
-Idle Speed:1000rpm/min
-Propeller:32*10 /32*12 /34*10
-Sparking Plug:NGK CM6
-Exhaust Amount:222.5cm3
-Diamete x Stroke :45mm x 35mm
-Ratio of  Compression:7.6 x 1
-Ratio of  Lubricating :30 x 1
-Net Weight:4950g
-Gross Weight;5610g
Item Packing
-DLE Gasoline-engine 222 For Model Airplane x 1

DLA32 32CC Gasoline Engine

Features
-3.8HP/8200rpm
-Idle speed:1700rpm/min.
-8.8Kg Pulling Force/100meters Altitude
-7.8Kg Pulling Force/1800meters Altitude
-Propeller: 18*8, 18*10, 19*8, 20*8
-Spark Plug:Special type
Product Details
-Exhaust Amount: 32.23cm3
-Diameter stroke: 37mm*30mm
-Ratio of compression: 7.6:1
-Lubrication Ratio：30:1 （Trial Run）， 40:1~50:1（Normal Flying）
-Weight: Main engine -910g, muffler-65g,  Ignition-100g
Item Packing
-DLA32  32CC Gasoline Engine  X 1 Set

Lithium Battery charger Balance parallel board


Features
-Lithium Battery charger Balance parallel board

Product Details
This product is used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
Main Features:
-Charge and balance up to six lithium batteries at the same time by working with to a balance charger.
-Cells will be better balanced and voltage difference will be smaller than conventional charging method. Save more time on cell balance during the later phase of a charging cycle.
-Parallel charge can significantly save your time. If you charge four batteries at the same time,the charge current is four times of that you used for a single pack, and  you need only 1/4 of  the charge time to charge every battery separately. Similarly, if  you charge six batteries at the same time,the charge current is six times and time is only 1/6.
-Support up to six 1S-6S batteries with the same chemical type and nominal voltage.

Item Packing
-Lithium Battery charger Balance parallel board X 1

I-Meter Multimeter 7 in 1


Features
-Thank you for the purchase of this I-Meter. The i-Meter can carry out an enormous range of functions related to Electric Powered models and has been designed with ease of use as a prime objective. This Instruction Manual describes the scope of i-Meter and how to make it work for you

Product Details
-Max input voltage:60v
-Voltage measurement range: 2-8S Lipo/Life/Lilon
-Voltage display resolution:0.001v
-Volt Port:2.54mm pitch pins,9 pins
-Max current:100A
-Shunt resistance:0.001ohm
-Displayed resolution A :0.01
-Temperature resolution:1 Celsius/1 Fahrenheit
-PPM signal output:750us-2150us
-Propeller rotating range:1-60000rpm
-Dimension:95.3x72.8x21.5mm
-Net weight:85g

-Battery checker
-Battery internal resistance
-Watt Meter
-Servo Tester
-Optical Tachometer
-Temperature Gauge
-Thrust Calculator

Item Packing
-Input Cable x 2
-Battery Internal Resistance Cable x 1
-i-Meter x 1
-Temperature Probe x 1
-Output Cable x 2

G.T.Power Rc Balance Charger/Discharger for nicd/nimh/lithium/pb Batteries

Product Details
-Operating Voltage Range: DC 10 - 18V
-Circuit Power: Max. 50W for charging, Max. 5W for discharging
-Charge Current Range: 0.1 - 6.0A
-Discharge Current Range: 0.1 - 1.0A
-Current drain for balancing Li-po: 300mAh/cell
-NiCd/NiMH battery cell count: 1 - 15 Cells
-Lithium Battery Cell Count: 1 - 6 Series
-Pb Battery Voltage: 2 to 20V
-Dimensions: 137mm x 98mm x 30mm
-Packet Includes: Multifuctional Connector
Item Packing
-G.T.POWER A606 MAX 6A 50W LiPo RC Digital Charger

New Hobbywing Ezrun SC10 70A 3655SL 3500KV Motor Combo


Features
-Integrated and compact design,very suitable for trucks(especially short course trucks) and buggies
-The built-in switching mode BEC of EZRUN-SC8 ESC has a powerfull output to supply all electronic equipments even with 4s Lipo input
-The major electronic components are sealed against splashing water and dust
-2 mounting holes on the bottom are helpful for firmly installing the ESC at the chassis
-Excellent start-up, acceleration and linearity features
-Proportional ABS brake function with 5 steps of maximum brake force adjustment,8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.
-Multiple protection features:Low voltage cut-off protection/Over-heat protection/Throttle signal loss protection/Motor blocked protection
-Easily program with only one button and compatible with pocket-sized Program Card(Optional equipment) and the advanced LCD Program Box (Optional equipment)
-ESC firmware can be updated through an USB adapter on the LCD Program Box (Optional equipment)

Product Details
-Cont./Burst Current:700/520A
-Suitable Motor:Sensorless brushless motors
-Suitable Car:1/10 Truggy/Buggy(Includes
-Motor Turns:2S Lipo:≥6T,KV≤6000; 3S Lipo:≥9T,KV≤4000
-Resistance:0.0007ohm               
-Battery:6-9 cells Ni-xx(Nimh or Nicd)2-3S Li-po
-BEC Output :6V/3A(Linear mode built-in BEC)
-Dimension:53.5(L)x36(W)x36(H)                                                                                           
-Weight 88G
-Motor:3655 3500KV

Item Packing
-Hobbywing Ezrun SC10 70A ESC
-Motor:3655 3500KV
-LED Program Card For Brushless ESC (Version 2.0)

Futaba 6EX 2.4G 6 CH Transmitter & Receiver


Features
-The simplest and most advanced 6-channel system available.

-The original was a revelation of affordability, proven performance and programming ease, created to ease the transition from 4- channel sport systems into 6-channel computer systems.

-Today's system offers the original's appeal, 6EXAS and 6EXH enhancements and the revolutionary, interference-free performance of the 2.4GHz FASST System.

Product Details
- Model Select – six model memory.

- Model Type – select airplane or heli programming in one transmitter.

-Servo Reversing – on all six channels.

- Dual Rate/Exponential – for ailerons, elevator and rudder.

-End Point Adjustment – fine-tunes servo throws on all six channels.

-Digital Trim – stores trim settings for each model for aileron, elevator, rudder and throttle.

-Fail Safe – a safety throttle setting in case of loss of transmitter signal.

-Battery Fail Safe – moves the throttle to a preset position when the airborne pack reaches 3.8V.

- Stick Mode – choose from Mode 1 through 4.

-Range Checking – Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.

-Changeable Throttle Stick – select ratchet for airplanes or smooth for helis.

- Adjustable Stick Length – choose the length that suits your flying style.

Airplane-Specific Programming Functions:


- Wing Mixing – for flaperon, flap trim, V-tail and elevon.

- Trainer System – with the transmitter as either the master or student system. Compatible with other Futaba systems.

- Throttle Cut – pre-programmed for safely shutting off the engine.

- Programmable Mixing (1 & 2) – two different mixes allow any two channels to be combined.


Helicopter-Specific Programming Functions:


- 5-Point Normal and Idle Up Throttle/Pitch Curves.

- Throttle Hold – for autorotation.

- Revo (Revolution Mixing) – mixes rudder and pitch together.

- Gyro Mixing – two gyro gain settings can be programmed and selected during flight.

- Swash to Throttle Mixing – corrects slowing of the engine's speed caused by the swashplate.

- Swashplate Types – choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).

-Swash AFR – Adjustable Function Rate, for use with 1S, 3S or 3E swash types.

The heart of the FASST system is the R606FS receiver: there's no other 2.4GHz receiver like it!

Size and weight —

The R606FS measures 1.64 x 1.08 x 0.36 inches and weighs just 7 grams without the case...perfect for park flyers, but powerful enough to easily control giant-scale models too. It's the best of both worlds!

Full-range capability —

The competition's full-range system includes a bigger, two-piece receiver; a smaller park flyer receiver must be purchased separately. The compact R606FS unit offers “all-in-one” convenience!

Antenna stress relief —

Unlike other receivers, the R606FS uses rubber grommets to minimize stress on the antennas. This helps prevent the antenna wire from fraying, and possibly putting your model at risk.

Installation ease —

The single R606FS unit can be installed without making any modifications. The competitor's 2.4GHz system requires that their two receivers be mounted in separate locations.

Number of connections —

The competition's two receivers mean two additional connection points, doubling the potential for a problem.

Item Packing
-Futaba 6EX Transmitter 2.4G x 1

-R606FS Receiver 2.4G x 1

-900mAh/9.6V TX battery x 1

-RX/TX battery charger type FBC-2J x 1

-English instruction manual x 1

Futaba 6EX-PCM 6 CH 35MHZ Transmitter & Receiver
 
Features
-The perfect set for anyone entering the hobby of radio control helicopter flying, features include a large 100 character LCD screen, six model memory with 4 character model name, PCM and PPM operation, dual rate and exponential on cyclic controls, 5 point mixing curves etc,
-Futaba didn't stop there however, continuing to develop the software to make setting up your helicopter a quick and easy operation, with powerful but simple to understand programming.
Being more accurate than a conventional radio, this software, with its clear liquid crystal display makes the cutting edge 6EXH radio the perfect sport system.
Product Details
-Digital trims

-Six model memory

-Servo reversing

-Dual rates Exponential

-End point adjustment

-Model select/data reset Programmed

-Pitch/rudder mix

-CCPM mix

-Gyro mix

-Failsafe PCM/PPM operation

-Throttle cut button 5 Point curves

-Throttle curve/idle up , (2 curves)

-Throttle hold,Pitch curve (2 curves) Hover pitch (2 curves)

Item Packing
Futaba 6EX-PCM 6 Channel Transmitter & Receiver 35MHZ x 1

Frsky 2.4GHz Radio System Telemetry DFT＋D8R Two Way Communication


Features
-The Two-way Radio System developed by FrSky provides an additional return link that would be used for monitoring the Rx’s voltage, temperature, location, speed and so on.

-Compatible with the following transmitters:
Futaba: 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28.
Hitec: Optic 6, Eclipse 7, Prism 7.
WFLY: WFT09, WFT08.

Product Details
-Operating Voltage Range: 6.0V-13.0V
Operating Current: 50mA
Output Power: 60mW
Resolution: 11bit (3072)

-Model: D8R
Weight: 16.2g
Dimension: 54*27*17mm
Operating Voltage Range: 4.0V-7.2V
Operating Current: 100mA
Specified Range: 1.5km (Ground Range)
Resolution: 11bit (3072)
Latency: 22ms
Number of Channels: 8CH
Analog voltage: 0~3.3V

Item Packing
-Transmitter module （Model: DFT）x 1
-Receiver module（Model: D8R）x 1

Hello All,
There are many new RC Hobby launch, i introduce some of them to you

Fitec Standard 21.0 kg.cm HV Digital metal gears servo
Part No.: FS5621M
Manufacturer: Fitec Servo

Features-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 2-cell Li-Po power
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm
Product DetailsPower：7.4V－8.4V
Speed：0.16sec/60° 0.14sec/60°
Torque：17.8kg.cm/247.2 oz.in 21.0kg.cm/291.7 oz.in
Weight：56g(1.41oz)
Size：40.2*20.0*38.6mm
Application：Air plane、Car、boat
Item Packing-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g

FEIYU GPS & Compass Module for Multi Rotor System

Part No.: FYGPSC 
Features

-THIS IS THE GPS & COMPASS MODULE MENTIONED

Product Details

-GPS & COMPASS INTERFACE MODULE
-Operating voltage ：4.0~6.0 Volt
-Current consumption ： 60mA (5V input)
-Dimensions ：55 x 33 x 20 mm
-Weight (not including wire) ：20g
-Temperature range ：-25°C~ +70°C

Item Packing

-FY-91Q control module x 1;
-GPS & COMPASS Interface module x 1;
-FY GPS Receiver x 1
-Related wiring to complete the set up.

FY-91Q Multi-rotor Flight Stabilization & Autopilot System
Part No.: FY-91Q 

Features

THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS MODULE MENTIONED IN THE FEATURE SECTION MUST BE PURCHASED SEPARATELY.

FY91Q MULTI ROTOR SYSTEM
Basics on how the system works:
· Inertial Stabilizer: The FY91Q utilizes an attitude flight stabilization system (AFSS)
which is inertial sensing based. The system also incorporates autonomous positioning
and flight control.
· The FY91Q AFSS integrates a three-axis gyroscope combined with tri-axial
accelerometers to sense and create a drift-free 3 dimensional stabilization system.
· The FY91Q also utilizes GPS and barometric pressure sensing to obtain accurate
aircraft positioning and altitude.
· By combining sensor data from the gyros and accelerometers, together with altitude
and GPS positioning, an accurate inertial navigation and autopilot system is formed.
Fixed positioned and altitude hover and return to home is just a switch away.
· As this product is still under intense Research and Development, FeiYu Tech has
enabled firmware upgrading via a USB-TTL Connector. As new algorithms are
developed for the autopilot system you can download the upgraded firmware from our
website.
Barometer and GPS & COMPASS module
v FY-91Q control module incorporates an accurate barometric pressure sensor. At
start up, the take-off point air pressure is measured, providing the autopilot with an
accurate relative height data.
v The GPS & COMPASS MODULE (to be purchased separately)
consist of a three-axis magnetic sensor and high sensitivity GPS receiver. This
module enables the autopilot to sense the flight course and exact location of the
aircraft.
v Note that if the FY91Q is not connected GPS & COMPASS module, it will
function as purely as a flight stabilizer for multi rotor aircraft. The Autopilot system
cannot be engaged.
v For the autopilot to function, the GPS Receiver must detect at least 5 satellites.

Autopilot Function
The current FY91Q firmware supports two autopilot functions; fixed altitude Auto Hover
and automated Return to Home. To enable autonomous flight, the GPS & Compass
module must be connected to the FY91Q.
· Auto Hover
o 3 dimensional GPS positioning is used to automatically maintain aircraft
hover position and altitude.
o Accuracy of hover position (range) depends on wind conditions and speed.
o When throttle is increased the altitude of the aircraft will increase. If the
aircraft is moved to another location (via AIL or ELE), upon releasing the
control sticks the aircraft will automatically hold position and hover in the
new location.
· Automated Return to Home
o By utilizing GPS positioning, the autopilot will return the aircraft to the
starting point upon activation of the RTH Mode.
o Upon reaching the starting point (home) the autopilot will activate Hover
Mode, maintaining position and altitude while waiting for your further
instructions.
o To establish the Home point, a minimum of 5 GPS satellites much be
detected.
ON SCREEN DISPLAY and DATA RADIO
a. The FY91Q supports OSD data output via UART interface.
b. By connecting this interface to the AP117 OSD, telemetric data such as GPS, flight
navigation, AHI and autopilot modes can be displayed on your downlink video.
c. The UART Interface can also be connected to the FY-606 digital data radio system,
which establishes a bi-direction radio communication between the FY91Q and your
portable computer.
d. By uploading our Ground Control Software (GCS) (free from our website), you can
monitor your flight on the GCS map, display on-board telemetry data and control the
aircraft flight path via the click of your mouse.


Product Details

FY-91Q Module
Operating voltage ：4.0~6.0 Volt
Current consumption ：50mA (5V input)
Dimensions ：55 x 33 x 20 mm
Weight (not including wires) ：20g
Operating Temperature ：-25°C~ +70°C
The maximum allowable rotation rate ： 3 rotations per minute

APPLICABLE AIRCRAFTMODELS
The FY91Q can be installed and flown it the following multi-rotor aircraft:
- 4 motored quadcopters;
- Tri-axial rotory aircraft with 6 motors
- Six-axial multi-rotor aircraft (6 motors)

REMOTE CONTROL SYSTEM COMPATIBILITY
FY-91Q have been tested to work with the following RC systems:
· Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；
· Graupner/JR PPM 8, PPM 12, SPCM mode；
· MPX PPM8, PPM 12 with UNI mode
· Any remote control system using the standard of 1.5 ms neutral position.

Item Packing

-FY-91Q control module x 1;
-FY91Q RC receiver connection cable pack x 1

Fitec Standard 15kg.cm Digital metal gears servo

Part No.: FS5515M 
Manufacturer: Fitec Servo


Features

-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 4.8V~7.4V
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

Product Details

Power：4.8V－6V
Speed：0.16sec/60° 0.14sec/60°
Torque：13.4kg.cm/186.4 oz.in 15.5kg.cm/215.3 oz.in
Weight：56g (1.46oz)
Size：40.2*20.0*38.6mm
Application：Air plane、Car、boat


Item Packing

-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g

JC30 EVO 30CC 2-Stroke Gas/Petrol Engine
www.rc-fans88.com

Part No.: JC30-EVO 
Manufacturer: JC ENGINE


Features-2 Stroke air cooled single cylinder
-Walbro membrane pump carburetor with dual needles and manual choke
-Automatic advancing electronic ignition
Product Details-Engine type ： 2—Stroke gasoline engine
-Displacement：30cc
-Bore × Stroke: 36mm × 30mm
-park plug: NGK CM6 or JC CM6
-Carburetor: Walbro special-designing vacuum pump diaphragm type duplex needle carburetor
-Max power ： 4.0hp/9000rpm
-Practical running speed ： 1100 － 9000rpm
-Net Weight ： 1100g (incoulding CDI and muffler)
-Ignition system ： CDI battery ignition (battery voltage: 4.8v—6v)
-Grease oil ratio ： 25-30:1 used during the break-in (the initial 2 working hours); 35-40:1 used after the break-in.
-Screw propeller dimension ： 18*8, 18*10, 19*8, 19*10
Item Packing-JC30 EVO 30CC 2-Stroke Gas/Petrol Engine

Testing video

http://v.youku.com/v_show/id_XMjY2MzY4NDgw.html