|
Τίτλος: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 19 Φεβ 2015, 20:14:41 Hi guys , I start new topic here to present my work on two wood models who I am the designer . Models are FW-190 A8 in 1/4 and 1/5 scale and FW-190 D9 in 1/4 and 1/5 scale
here some progress of short fuse of A8 : (http://imagizer.imageshack.us/v2/1024x768q90/840/92nz.jpg) (https://imageshack.com/i/nc92nzj) (http://imagizer.imageshack.us/v2/1024x768q90/819/h9bnk.jpg) (https://imageshack.com/i/mrh9bnkj) I forgot to say what I use for my A8 version (http://imagizer.imageshack.us/v2/800x600q90/850/u8zu.jpg) (http://"https://imageshack.com/i/nmu8zuj") (http://imagizer.imageshack.us/v2/800x600q90/842/0i8t.jpg) (http://"https://imageshack.com/i/ne0i8tj") (http://imagizer.imageshack.us/v2/1024x768q90/841/bt4hw.jpg) (http://"https://imageshack.com/i/ndbt4hwj") (http://imagizer.imageshack.us/v2/800x600q90/911/F5Dir0.jpg) (https://imageshack.com/i/pbF5Dir0j) I am allmost ready with the A8 fuselage :) (http://imagizer.imageshack.us/v2/800x600q90/661/vxgjR0.jpg) (https://imageshack.com/i/idvxgjR0j) (http://imagizer.imageshack.us/v2/800x600q90/538/IzbNpz.jpg) (https://imageshack.com/i/eyIzbNpzj) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 19 Φεβ 2015, 20:15:15 Hi again , I made the airfoils of original wings in the root NACA 23015 and NACA 23009 in the tip of wing
So the wing will have the original foil , What you think about this my decision ? (http://imagizer.imageshack.us/v2/800x600q90/745/Zn64M4.jpg) (https://imageshack.com/i/kpZn64M4j) (http://imagizer.imageshack.us/v2/800x600q90/904/joGmKB.jpg) (https://imageshack.com/i/p4joGmKBj) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 19 Φεβ 2015, 21:11:38 And ribs in the wing
(http://imagizer.imageshack.us/v2/800x600q90/674/Bm7TTi.jpg) (http://"https://imageshack.com/i/iqBm7TTij") I put the drawing of Sierra landing gear it to the plans, so I made position . I choose Sierra because that are strong and are 1/5 and 1/4 scale gears (http://imagizer.imageshack.us/v2/800x600q90/746/ukPIB5.jpg) (http://"https://imageshack.com/i/kqukPIB5j") Some progrss with the gear (http://imagizer.imageshack.us/v2/800x600q90/673/aVyAcR.jpg) (https://imageshack.com/i/ipaVyAcRj) I start to make the wing ribs of the wing, I use for more reality the real plans of the A5 . Off course I have more work on the ribs and make stringer holes . (http://imagizer.imageshack.us/v2/800x600q90/913/z2c1At.jpg) (http://"https://imageshack.com/i/pdz2c1Atj") (http://imagizer.imageshack.us/v2/800x600q90/540/bVa3bC.jpg) (http://"https://imageshack.com/i/f0bVa3bCj") finally I made the design of the wing :) have some litlle details (http://imagizer.imageshack.us/v2/1024x768q90/911/nqPZGe.jpg) (https://imageshack.com/i/pbnqPZGej) So the all drawings cut and now start the nteresting stage :) (http://www.fokkerc.com/snimki/FW190A3rebra%20(1).JPG) (http://www.fokkerc.com/snimki/FW190A3rebra%20(2).JPG) (http://www.fokkerc.com/snimki/FW190A3rebra%20(3).JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 19 Φεβ 2015, 21:13:11 Hi again, I I started assembling the wings. :)
https://www.youtube.com/watch?v=jfbyLlCOtZs&feature=youtu.be (https://www.youtube.com/watch?v=jfbyLlCOtZs&feature=youtu.be) jfbyLlCOtZs&feature (http://www.fokkerc.com/snimki/fw190aw%20(2).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(3).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(4).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(5).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(6).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(7).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(8).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(9).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(10).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(11).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(12).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(13).JPG) (http://www.fokkerc.com/snimki/fw190aw%20(14).JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: hpergm στις Παρασκευή, 20 Φεβ 2015, 07:08:40 Hi again , I made the airfoils of original wings in the root NACA 23015 and NACA 23009 in the tip of wing So the wing will have the original foil , What you think about this my decision ? Dear Rumen, Considering that many other manufacturers of 1/5 or 1/4 scale FW190's tend to use non-scale airfoils (Meister even uses almost flat-bottomed, if I am not mistaken?) which are also thicker in the tip, maybe it would be prudent not to scale down airfoil choice from 1:1... Especially the dip in the LE bottom surface of the 23009 looks like it may give some nasty tip-stall tendencies. But - OK - my 2 cents here... Keep going - looks absolutely great, a work of art. Including the embossing of the rivets and hatches on the ply (great idea!). BR, Hector. Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Παρασκευή, 20 Φεβ 2015, 08:44:41 Thanks Hector , Yes , we had discussion in RCSB ( http://www.rcscalebuilder.com/forum/forum_posts.asp?TID=20634&PN=0&TPN=16) about airfoils, I think that the other designers use ONE tipe airfoil to the tip of the wing because thay don't want troubles and they have insurance for the good flight but is not scale , the other reason can be that they want to put landing mechanism in the wing ,because if you use the original airfoil like me you need to make many calculations about washout between the main airfoil and the tip airfoil who is on a constant change like most wings from root to tip :)
I prefer to be like the original , will be very easy to change like other RC plans :) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: hpergm στις Παρασκευή, 20 Φεβ 2015, 09:06:54 That's a clearly a "strategic" (rather than technical) choice then Rumen - one cannot argue with that! :thumbs up:
Keep feeding us with sexy pics. BR, Hector. Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Παρασκευή, 20 Φεβ 2015, 09:17:45 It is interesting how will fly, for me it is clear that will fly , the question is how :) I believe that the Germans are made the calculations before me , I just copy them
I made wood cowl for A8 :))) Yes wood cowl , not composite, I want to try how will be if the cowl is from wood , what weight will be and other questions which I have in my mind :)) Ok this is the project (http://www.fokkerc.com/snimki/FWcowl (1).JPG) (http://www.fokkerc.com/snimki/FWcowl (2).JPG) (http://www.fokkerc.com/snimki/FWcowl (4).JPG) (http://www.fokkerc.com/snimki/FWcowl (3).JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Παρασκευή, 20 Φεβ 2015, 20:43:51 Hi guys , so now I have the cut parts of all model :) next is assembling
The ailerons, flaps and rudder I will cut later from 1.5 or 2mm plywood :) (http://i58.tinypic.com/jktxqw.jpg) (http://i57.tinypic.com/kd662w.jpg) (http://i58.tinypic.com/fu3y4m.jpg) (http://i57.tinypic.com/m7vm1e.jpg) (http://i57.tinypic.com/vhuvic.jpg) (http://i62.tinypic.com/2lly2bl.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: ArgyrisGiannetakis στις Παρασκευή, 20 Φεβ 2015, 21:32:30 Great job dear Rumen!!!Very nice detailing! :thumbs up:
Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: w1ndsurfer στις Κυριακή, 22 Φεβ 2015, 07:27:29 Thanks Hector , Yes , we had discussion in RCSB ( http://www.rcscalebuilder.com/forum/forum_posts.asp?TID=20634&PN=0&TPN=16) about airfoils, I think that the other designers use ONE tipe airfoil to the tip of the wing because thay don't want troubles and they have insurance for the good flight but is not scale , the other reason can be that they want to put landing mechanism in the wing ,because if you use the original airfoil like me you need to make many calculations about washout between the main airfoil and the tip airfoil who is on a constant change like most wings from root to tip :) I prefer to be like the original , will be very easy to change like other RC plans :) Hi Fokke, impressive project (as usual! :thumbs up:) It will be interesting to see if the scale wing flies like the original, the following is from English test pilot Eric "Winkle" Brown: The stalling speed of the Fw 190A-4 in clean configuration was 127 mph (204 km/h) and the stall came suddenly and virtually without warning, the port wing dropping so violently that the aircraft almost inverted itself. In fact, if the German fighter was pulled into a g stall in a right turn, it would flick out into the opposite bank and an incipient spin was the inevitable outcome if the pilot did not have its wits about him. The stall in landing was quite different, there being intense pre-stall buffeting before the starboard wing dropped comparatively gently at 102 mph (164 km/h). Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τρίτη, 24 Φεβ 2015, 10:46:25 Thanks guys,
Yes it will be interesting, always I can change the wing ribs but I belive that the result from my projekt will be good for the model. Off course the model can not be tested under the same conditions as the original so I think that will be ok . The airfoil NACA 23015 is a profil for models to , so I think is OK :) I started with assemnbling of fuselage, off course have several litlle mistakes , but I correct them (http://www.fokkerc.com/snimki/DSCI2146.JPG) (http://www.fokkerc.com/snimki/DSCI2148.JPG) (http://www.fokkerc.com/snimki/DSCI2153.JPG) (http://www.fokkerc.com/snimki/DSCI2166.JPG) (http://www.fokkerc.com/snimki/DSCI2160.JPG) (http://www.fokkerc.com/snimki/DSCI2164.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τρίτη, 24 Φεβ 2015, 11:56:13 continuation (http://www.fokkerc.com/snimki/DSCI2165.JPG) (http://www.fokkerc.com/snimki/DSCI2167.JPG) (http://www.fokkerc.com/snimki/DSCI2171.JPG) (http://www.fokkerc.com/snimki/DSCI2173.JPG) (http://www.fokkerc.com/snimki/DSCI2175.JPG) (http://www.fokkerc.com/snimki/DSCI2178.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 25 Φεβ 2015, 17:21:52 So I pulled my old long table and began sticking to detail with glue.
For me the way of assembly of these structures differ slightly from the classical method of construction of shipway, because I think that enough is assembled model and takes a few points with which to catch on a flat surface and, ensure accuracy. First I fixate skeleton with cyanoacrylate glue so that it does not spill but to fix the detail that allows subsequently be adjusted in construction coated with slow glue which in this case is Time Express. After assembling the skeleton with cyan glue fix it on the counter and straighten all angles in the correct position only after everything I tripped and I am sure that everything is in the correct position to start slowly coated with glue Moment Here it should stringers before placing the body to come off the counter. The next step is to fix the stringers :) (http://www.fokkerc.com/snimki/IMG_20150120_133253.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_133304.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_133419.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_133438.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_133456.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_133514.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 25 Φεβ 2015, 17:23:59 I made a crash test. On the second film you can see that on the small piece have glue and wood residue from the horizontal plywood stringer. So I think that this glue work great in any situation smile
The test I made before to glue all 5x5mm stringers ! https://www.youtube.com/watch?v=svbxFYgz9CU&feature=youtu.be https://www.youtube.com/watch?v=j80Z_MiC4qw&feature=youtu.be (http://www.fokkerc.com/snimki/IMG_20150120_142031.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_153135.jpg) (http://www.fokkerc.com/snimki/IMG_20150120_153209.jpg) (http://www.fokkerc.com/snimki/IMG_20150121_163319.jpg) (http://www.fokkerc.com/snimki/IMG_20150121_163358.jpg) (http://www.fokkerc.com/snimki/IMG_20150121_163348.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: Δημήτρης Άρτα στις Τετάρτη, 25 Φεβ 2015, 17:47:16 This structure Rumen is for 1/4 A8 or 1/5 ?
Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 25 Φεβ 2015, 20:47:34 this is 1/5 scale is it , I made A8 in this scale. yesterday I send my files for cuting of Dora 9 1/5 to :)
I am ALMOST ready with wings to , I need to glue the 14mm stringers for landinggears and the composite bube, and servo plates For the elevator I will make them "legs" and I will put one more stringer for biggger stability for 1/4 scale model Cheers (http://www.fokkerc.com/snimki/FW/IMG_20150122_142239.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150123_132436.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150123_132443.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150123_153855.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150123_154723.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150123_155843.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 26 Φεβ 2015, 09:22:08 this is the result from my last drawings , this is from 2mm plywood
(http://www.fokkerc.com/snimki/FW/DSCI2150.JPG) (http://www.fokkerc.com/snimki/FW/DSCI2152.JPG) (http://www.fokkerc.com/snimki/FWDSCI2155.JPG) (http://www.fokkerc.com/snimki/FW/DSCI2156.JPG) (http://www.fokkerc.com/snimki/FW/DSCI2148.JPG) (http://www.fokkerc.com/snimki/FW/DSCI2149.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 26 Φεβ 2015, 10:07:13 Some progress on wood part of canopy
(http://www.fokkerc.com/snimki/FW/DSCI0003.JPG) (http://www.fokkerc.com/snimki/FW/DSCI00025.JPG) (http://www.fokkerc.com/snimki/FW/DSCI0007.JPG) (http://www.fokkerc.com/snimki/FW/DSCI0008.JPG) (http://www.fokkerc.com/snimki/FW/DSCI0013.JPG) (http://www.fokkerc.com/snimki/FW/DSCI0015.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Σάββατο, 28 Φεβ 2015, 19:26:51 Today I cuted the machine gun hood, with this detail I finished with drawing on this model , I have to mke some elements on the skeleton and covering :)
Cheers https://www.youtube.com/watch?x-yt-ts=1422579428&x-yt-cl=85114404&v=TOU_dyTE4JU (http://i61.tinypic.com/17fp0k.jpg) (http://i57.tinypic.com/2r723c5.jpg) (http://i61.tinypic.com/2vdfyoj.jpg) (http://i62.tinypic.com/2dtb247.jpg) (http://i60.tinypic.com/bgwwpl.jpg) (http://i62.tinypic.com/2vdn1tv.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 11:31:31 Hi guys, I am glad to show you the first looc of A8 1/4 and 1/5 plans :)
The plans are based around 95% on the original factory Germany plans of the real machine/ This was my idea, to create model maximum near to the original . So this is it (http://i59.tinypic.com/sxoujc.jpg) (http://i58.tinypic.com/2nu4mm9.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 11:32:07 Now we have and Dora 9 in 1/4 and 1/5 scale , whoopeeeeee :))))
(http://i60.tinypic.com/10h12mh.jpg) (http://i61.tinypic.com/zwjfv7.jpg) (http://i62.tinypic.com/rjiqsh.jpg) (http://i57.tinypic.com/2hmfouc.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 12:37:21 Hi guys , OK this is it , I am ready with the D9 1/5 plans In the plans I put the realy great FW-190 D9 profil of Thiery Vallet and his Kameleon Profils (https://www.facebook.com/KameleonProfils)
(http://i61.tinypic.com/dpgvex.jpg) (http://i57.tinypic.com/29p5b2x.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 12:38:52 Nice engine discussion !
I made some changes in plans as logo and text (http://i61.tinypic.com/ev27af.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 19:49:35 Assembling took me 2 hours with making and drinking cofe :) without stringers , with them around 3 hours of all lol :))))
So t this is it and short video : qDpHH-vRfuQ&feature (http://www.fokkerc.com/snimki/FW/IMG_20150227_092730.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_102608.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_102849.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_103111.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_103121.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_110637.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 11 Μαρ 2015, 19:57:13 and the next pics of work :
(http://www.fokkerc.com/snimki/FW/IMG_20150227_112700.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_113333.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_113507.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_114134.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_114320.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_114411.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 12 Μαρ 2015, 12:09:59 The stringers are already in the places and next step is gluing
(http://www.fokkerc.com/snimki/FW/IMG_20150227_152034.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_151948.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_152011.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150227_152026.jpg) (http://i61.tinypic.com/24ec846.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Παρασκευή, 13 Μαρ 2015, 09:38:59 Studio pictures of FW 190 D9
(http://www.fokkerc.com/snimki/FW/studio/_MG_1105.JPG) (http://www.fokkerc.com/snimki/FW/studio/_MG_1221.JPG) (http://www.fokkerc.com/snimki/FW/studio/_MG_1236.JPG) (http://www.fokkerc.com/snimki/FW/studio/_MG_1240.JPG) (http://www.fokkerc.com/snimki/FW/studio/_MG_1271.JPG) (http://www.fokkerc.com/snimki/FW/studio/_MG_1213.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Παρασκευή, 13 Μαρ 2015, 09:44:05 OK guys, this is the last part of pictures from today
The pictures are made in Creativ Hall studio from my friend Ivailo Stanev photographer (http://www.fokkerc.com/snimki/FW/studio/A8/11056964_815585958521943_1117626617_n.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/_MG_1302.JPG) (http://www.fokkerc.com/snimki/FW/studio/A8/_MG_1465.JPG) (http://www.fokkerc.com/snimki/FW/studio/A8/_MG_1485.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: ArgyrisGiannetakis στις Παρασκευή, 13 Μαρ 2015, 09:49:40 Great Job dear Rumen!Fantastic!Very professional! :thumbs up:
Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τρίτη, 17 Μαρ 2015, 21:13:37 Efharisto para poli Argiri :))
Update 1/4 cowl A8 and D9 (http://i61.tinypic.com/ipsksh.jpg) (http://i57.tinypic.com/2h5mn3m.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 18 Μαρ 2015, 19:16:47 Near to the finish with 1/4 :)
(http://www.fokkerc.com/snimki/FW/IMG_20150317_134941.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150317_135002.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150318_154500.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150318_154513.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150318_154534.jpg) (http://www.fokkerc.com/snimki/FW/IMG_20150318_154600.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Δευτέρα, 30 Μαρ 2015, 00:15:03 Preparing for molding
(http://i62.tinypic.com/9ghauq.jpg) (http://i60.tinypic.com/2vd5y6w.jpg) The first Dora9 1/4 is out from CNC machine before 1 hour and my wife sort them :))) ]The model will fly in Greece Always is great when the wife help in our hobby :))) I put the fone on the ribs for scaling, the fone is 5 inches .........! I didn't expect that in 1/4 the airplanes is so giant :))) (http://i59.tinypic.com/2zzizwo.jpg) (http://i59.tinypic.com/352m3r4.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 8 Απρ 2015, 23:52:15 Molding A8 and D9 1/4 cowls
(http://i57.tinypic.com/19t4jn.jpg) (http://i59.tinypic.com/14n1ksn.jpg) (http://i57.tinypic.com/qpjb5u.jpg) (http://i62.tinypic.com/20u4rwn.jpg) (http://i61.tinypic.com/2m6wsc2.jpg) (http://i60.tinypic.com/o85co3.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 8 Απρ 2015, 23:52:53 Hi everyone , the first detail is out from the mold
(http://i58.tinypic.com/xf3l7t.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Δευτέρα, 13 Απρ 2015, 20:57:43 Hello again guys, with this first carbon fiber detail from A81/4 cowl mold I can say that two models FW 190 A8 and Dora 9 in 1/4 scale are available for sale!
The A8 cowl usualy will be glass fiber . (http://www.fokkerc.com/snimki/FW/studio/IMG_20150412_140302.jpg) (http://www.fokkerc.com/snimki/FW/studio/IMG_20150412_140242.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Δευτέρα, 13 Απρ 2015, 20:59:30 The second cowl is glassfiber , here is it
(http://i58.tinypic.com/2lms80l.jpg) (http://i61.tinypic.com/161gi9j.jpg) (http://i59.tinypic.com/4tok6h.jpg)[/FONT] Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Σάββατο, 25 Απρ 2015, 17:23:56 Here is the work on plug and mold for vacoom forming
My frend Lyidmil make mold of A8 1/4 canopy for vacoom forming Thanks my friend !!!! (http://www.fokkerc.com/snimki/FW/studio/A8/IMG_20150424_123909.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/IMG_20150424_141841.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/IMG_20150424_161933.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/IMG_20150424_174214.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/IMG_20150424_203227.jpg) (http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0051.JPG) (http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0052.JPG) (http://www.fokkerc.com/snimki/FW/studio/A8/DSCI0057.JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τρίτη, 28 Απρ 2015, 22:05:47 some progress
(http://i58.tinypic.com/24wulco.jpg) (http://i58.tinypic.com/4kvcwh.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 13 Μαΐ 2015, 20:37:34 The second plug of bubble canopy for FW-190 D9 1/4 is ready
(http://i60.tinypic.com/iykjdf.jpg) (http://i60.tinypic.com/sdhbmd.jpg) (http://i62.tinypic.com/2d0c55g.jpg) [img]http://i58.tinypic.com/m8gsaq.jpg[ Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Σάββατο, 23 Μαΐ 2015, 21:30:06 COLOR=#141823]The canopy mold for D9 1/4 is ready[/COLOR]
(http://i60.tinypic.com/24c84uw.jpg) (http://i57.tinypic.com/2e5o329.jpg) (http://i60.tinypic.com/4jrlop.jpg) (http://i59.tinypic.com/2yubqfr.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 2 Σεπ 2015, 22:29:06 .....................
(http://i58.tinypic.com/vo8spg.jpg) (http://i62.tinypic.com/1zwzok6.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 2 Σεπ 2015, 22:30:14 Here are the gun hoods molds
(http://i58.tinypic.com/11j8582.jpg) (http://i62.tinypic.com/33omk9z.jpg) (http://i58.tinypic.com/51bno5.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 23 Σεπ 2015, 18:59:54 Hi guys
It is time to start covering the 1/5 and 1/4 models. I choice to cover all 4 models with 1mm plastic and then to cover all surface with aluminium sheets . I plan to make composite panels for covering the wood skeleton of the planes. So this is the beginning of covering of 1/5 wings. After few days I will assembling the 1/4 wings smile emoticon (http://i62.tinypic.com/2ug1kjm.jpg) (http://i60.tinypic.com/1z4zbbm.jpg) (http://i62.tinypic.com/e83lls.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 10 Φεβ 2016, 22:19:18 Great news from France , A guy who bought A8 1/4 , now have a a good progress :)) I am soo happy that this great bird will fly on the and of the winter :))
The engine 3W160 B4 Real craftsmanship!!I love thiat build (http://www.fokkerc.com/snimki/FW/A8/1.jpg) (http://www.fokkerc.com/snimki/FW/A8/2.jpg) (http://www.fokkerc.com/snimki/FW/A8/3.jpg) (http://www.fokkerc.com/snimki/FW/A8/4.jpg) (http://www.fokkerc.com/snimki/FW/A8/5.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 10 Φεβ 2016, 22:20:44 .................
(http://www.fokkerc.com/snimki/FW/A8/7.jpg) (http://www.fokkerc.com/snimki/FW/A8/8.jpg) (http://www.fokkerc.com/snimki/FW/A8/9.jpg) (http://www.fokkerc.com/snimki/FW/A8/10.jpg) (http://www.fokkerc.com/snimki/FW/A8/11.jpg) (http://www.fokkerc.com/snimki/FW/A8/12.jpg) (http://www.fokkerc.com/snimki/FW/A8/13.jpg) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 21 Απρ 2016, 13:12:46 Hello guys, I have a pleasure to present you the first finished FW 190 A8 1/4 by Charly from France !
He made a really great work with this model kit and I wish him successful first fly ! smile emoticon For me is a great to see something who I projekt ready for fly! Thanks to Charly Basset (http://www.fokkerc.com/snimki/FW/A8/fw1901%20(1).JPG) (http://www.fokkerc.com/snimki/FW/A8/fw1901%20(6).JPG) (http://www.fokkerc.com/snimki/FW/A8/fw190%20(2).JPG) (http://www.fokkerc.com/snimki/FW/A8/fw190%20(3).JPG) (http://www.fokkerc.com/snimki/FW/A8/fw190%20(4).JPG) (http://www.fokkerc.com/snimki/FW/A8/fw190%20(5).JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 5 Μαΐ 2016, 23:43:18 IT FLY !!!!
GUYS Charly from France done today !!! "" two flights , airplane in perfect condition engine is more than enought and run ok , need tuning but no sign of overheating , plane fly ok , no trim needed ,too sensitive on elevator : will add 500gr in cowl , stall is violent (volontary tested ) but recovery easy and quick , try to retract gear on second flight but not enought pressure , due to heavy crosswind i choose grass strip on second landing"" (http://www.fokkerc.com/snimki/FW/A8/1polet%20(1).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(2).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(3).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(4).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(5).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(6).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(7).JPG) (http://www.fokkerc.com/snimki/FW/A8/1polet%20(8).JPG) Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Τετάρτη, 14 Ιουν 2017, 20:09:03 VeKdDjJm6R4
Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: carapis στις Τετάρτη, 14 Ιουν 2017, 23:09:37 :thumbs up: Great job Rumen...!!! :thumbs up: Chris Τίτλος: Απ: FW 190 A8 D9 in 1/4 1/5 scale Αποστολή από: fokke στις Πέμπτη, 6 Ιουλ 2017, 22:10:12 Evharisto para poli !
Hello guys, I want to present you my NEW website ! I want to thank of my friend Hristo Pandjarov who is responsible for everything on the web ! ! Thanks man ,I am very grateful!!! On the website you can find all my models , video and pictures from some events and costumers . Also you can coment any posts in news section , and many other thinks So this is it : https://www.fokkerc.com/ |