www.Diamond-Models.gr

  Καταστήματα
  Κεντρική σελίδα
  Αρθρα
  Links
  Σύλλογοι
  Γιατί αυτή η σελίδα;

WWW Aeromodelling GR

Aeromodelling GR - IBabylon ThemeClassic YaBB SE ThemDelta TPNetBiz TPOmega TPSMF Default Theme

[Diamond-Models Ι. Γεωγιάδης]

]Νέα Παραλαβή Οκτωμβρίου
Black Horse L-39 Albatros 90mm EDF ARTF






The L-39 is the most widely used jet trainer in the world and has served with over 30 air forces. In addition to performing basic and advanced pilot training, it has also flown combat missions in a light-attack role.

Black Horse has managed to faithfully recreate this iconic jet using the clever lightweight CNC construction techniques they have become well known for. The fuselage features a hinged opening canopy and removable cockpit interior allowing a large access hatch for easy battery access. Black Horse paid extra attention to this cockpit on this model and used hand painted vac-form components to reproduce a very detailed cockpit area. The wing and tailplane halves plug in to the fuselage on an aluminium spar and are removable for easy transportation.

Supplied complete with mechanical retract units and tough CNC machined oleo legs. The sprung oleos help with ground handling and she copes well with grass surfaces.

The L-39 is designed to suit higher end 90mm electric ducted fan units and 8S battery setups. A good example would be a Wemotec 90mm Midi Fan Evo, HET 650-68-1500 motor, 120A HV ESC and a 8S 29.6v 6,000mAh Li-Po. It would also suit turbine conversions (no turbine information is supplied).

• Mechanical retracts, oleos and wheels included
• Detailed cockpit and pilot
• Balsa/Ply construction using advanced CNC techniques
• Covered with high quality Oracover film

Specification

Wingspan:    1,450mm
Length:    1,860mm
Weight:    4.3 - 4.6 kg
Servos:    8 (+3 Retract) (Req.)
Radio System:    8 Channel (Req.)
Electric Motor:    from 1000kv-2000kv (Req.)
EDF Fan Diameter:    90mm (Req.)
Speed Controller:    85-HV--120A-6s (Rec.)
LiPo:    6s-10S  5,000-6,000mAh (Req.)

[Diamond-Models Ι. Γεωγιάδης]

Saturn X6 6 Channel Combo 2.4GHz FHSS






A revised version of the 6 channel high performance Saturn 2.4GHz radio system at an incredibly low price! Perfect for receiver-ready models as it is supplied without servos. A new full-range, even smaller six channel receiver is supplied as standard.

 Interference-Free 2.4GHz Technology
 4 Channel Digital Proportional Radio with two extra switched channels.
 Servo Reversing on main channels
 Battery Condition LEDs
 Lightweight 6 Channel Receiver Included!


   

Specification
Modulation:    Saturn X 2.4GHz
   
Channels:    6

[Diamond-Models Ι. Γεωγιάδης]

JOYSWAY electric "BULLET" model RTR






Shooting across the water, the new Bullet Speedboat will certainly leave its mark. Supplied with 2.4GHz radio gear, a 30A water-cooled brushless ESC w/ BEC mated to a powerful 2815 out-runner brushless motor, tough 37g steering servo and CNC aluminium rudder, it just requires an 11.1V 2200mAh 20C LiPo pack, balance charger plus 8 'AA' batteries for the transmitter to complete.    

Specification
Hull Material:    One Piece Blow Moulded
Length:    729mm (28.7")
Weight:    1.25kg (2.75lb)
Servos:    1x 37g (Inc.)
Radio System:    3 Channel 2.4GHz (Inc.)
Electric Motor:    Water Cooled 2815 Outrunner (Inc.)
Speed Controller:    30A Water Coolled (Inc.)
LiPo:    11.1v 2200mAh 20C (Req.)
Beam:    180mm (7.1")

[Diamond-Models Ι. Γεωγιάδης]

Zenoah G450PU Air και Zenoah G380PU Air

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές σε Μπαταρίες




Ripmax 6.0v 2500mAh Eneloop Rx Pack Hump
Ripmax Vanquish 7.2v 3000mAh Ni-MH Battery with Tamiya Connector
Hi-Energy 6.0v 1600mAh "A" Ni-MH Rx Pk Flat
Hi-Energy 4.8V 2200mAh Ni-MH Rx Pk Square
Hi-Energy 6.0v 2200mAh Ni-MH Rx Pk Flat
Intellect 2S 240mAh 25C Li-Po
UDI U9/10/21  Battery
Ripmax Li-Po Battery 3.7v 1100mah

[Diamond-Models Ι. Γεωγιάδης]

PHOENIX MODEL P51- MUSTANG 60CC SCALE 1:5 1/4 ARF







Introducing

    The P-51 Mustang was a solution to the clear need for an effective bomber escort. The Mustang was at least as simple as other aircraft of its era. It used a common, reliable engine and had internal space for a huge fuel load. With external fuel tanks, it could accompany the bombers all the way to Germany and back. Enough P-51s became available to the 8th and 9th Air Forces in the winter of 1943–44.
     For the ultimate, realistic flight experience, the P-51 comes with all-metal mechanical spring-loaded strut assemblies. The P-51 comes out of the box with all kinds of details that have been finished for the consumer, including a factory-painted fiberglass cowl, scale antenna, scale-shaped spinner, aluminum wheel hubs and much more. For a high-quality outer surface and realistic appearance, the P-51 is dressed with Oracover.

Technical data

- Wingspan: 2190mm (86.2 in)
- Length: 1907mm (75 in)
- Flying weight: 9-12 kg
- Wing area: 92 dm2
- Wing loading: 98g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Retract gear type: Air-retract With CNC Suspension Metal Struts (included)
- Spinner size: P51 Mustang type, aluminum plate 115mm (included)
- Radio: 6 channel minimum (not included)
- Servo: 9 standard hi-torque servo: 2 aileron; 2 flap; 2 elevator; 1 rudder;1 retract; 1 throttle (not included)
- Recommended receiver battery: 6.0V 2400/2600mAh NiMH (2) (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: 50-60 CC gas engine (two stroke) (not included)
- Motor: brushless outrunner 2600-3000 W, 190 KV (not included)
- Gravity CG: 190 mm (7,48 in) Back from  the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 15mm up/down, 10% expo; High: 20mm up/down, 10% expo
- Control throw Elevators: Low: 15mm up/down, 12% expo; High: 20mm up/down, 12% expo
- Control throw Rudder: Low: 40mm right/left, 15% expo; High: 60mm right/left, 15% expo
- Control throw Flaps: Mid: 25mm down; Landing: 35mm down
- Experience level: Intermediate
- Plane type: Scale Military
RECOMMENDED MOTOR AND BATTERY SET UP            
- Motor: hacker brushless A60 (not included)
- Propeller: 22x12 APC E (not included)
- Lipo cell: 12 cells / 5000 – 6000mAh (not included)
- Esc: 120-160A / HV (not included)
Feature

- Designed for compatibility with both GP and EP flight
- Covered in genuine ORACOVER®
- Air-retract With CNC Suspension Metal Struts included
- Retractable Tail Wheel with Gear Doors included
- Full-depth cockpit and instrument panel and pilot included
- Scale plastic bomb included
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable canopy for easy change lipo battery and set up radio
- Strong Light Weight Construction
- Superb flying characteristics, plus an accurate scale outline
- High-quality hardware package included
Colour chart

-   White             (# 21010)
-   Blue                (# 21050)
-   Black              (# 21071)
-   Silver              (# 21091)
Packing

-   Dimension (mm)
    * Box                 :  1539 x 595 x 283
    * Cover carton :  1555 x 605 x 280

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές Οκτώβριος 2014
PHOENIX MODEL Giant VOLCANO 60CC SCALE 1:4 1/4 ARF







Introducing

    A real beauty aircraft. Anyone who likes the war birds is bound to love this airplane. It has a large wing and very strong construction. Control surface size and the right tail moment promise great flying characteristics, wide speed range, slow landings and precise aerobatics. An impressive scale Landing gear is also included with the kit. It is designed exclusively for this aircraft. It is a piece of engineering of its own. The Volcano is an easy-to-assemble, easy -to-fly blast for any pilot interested in large-scale flight. Functioning scale flaps make takeoffs and landings a breeze. Factory-created scale detail like the canopy, cockpit, pilot, control surfaces... Its authentic ORACOVER covering supplies a superior sheen. The VOLCANO ARF is part of PHOENIX MODEL's complete line of top-quality aircraft and accessories.
Technical data

- Wingspan: 2567mm (101in)
- Length: 2190mm (86.2 in)
- Flying weight: 11-13 kg
- Wing area: 101 dm2
- Wing loading: 99g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Retract gear type: Air-retract With CNC Suspension Metal Struts (included)
- Spinner size: 115mm (included)
- Radio: 6 channel minimum (not included)
- Servo: 10 standard hi-torque servo: 2 aileron; 2 flap; 2 elevator; 1 rudder;1 retract; 1 throttle; 1 steering nose. (not included)
- Recommended receiver battery: 6.0V 2400/2600mAh NiMH (2) (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: 50- 60 CC gas engine (two stroke) (not included)
- Motor: brushless outrunner 2600-3000 W, 190 KV (not included)
- Gravity CG: 141 mm (5.5 in) Back from  the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 12mm up/down, 10% expo; High: 15mm up/down, 10% expo
- Control throw Elevators: Low: 12mm up/down, 12% expo; High: 15mm up/down, 12% expo
- Control throw Rudder: Low: 30mm right/left, 15% expo; High: 45mm right/left, 15% expo
- Control throw Flaps: Mid: 25mm down; Landing: 35mm down
- Experience level: Intermediate
- Plane type: Scale Military
RECOMMENDED MOTOR AND BATTERY SET UP           
- Motor: Hacker A60 (not included)
- Propeller: 22x10 E; 22x12 E APC (not included)
- Lipo cell: 12 cells / 5500 – 6000mAh (not included)
- Esc: 120-160A / HV (not included)
Feature

- Designed for compatibility with both GP and EP flight

- Covered in genuine ORACOVER®

- Separate fuselage and wing structure allows compact transportation

- Extremely lightweight laser-cut all-wood construction

- Air-retract With CNC Suspension Metal Struts included

- Full-depth cockpit and instrument panel and pilot included

- Scale plastic bomb included

- Bolt-on two-piece wing for easy transport and setup at the field

- Removable canopy for easy change lipo battery and set up radio

- Superb flying characteristics, plus an accurate scale outline

- High-quality hardware package included
Colour chart

•  Light green    (# 21042)
•  Blue                (# 21050)
•  Cub Yellow    (# 21030)
•  White              (# 21010)
•  Black               (# 21071)
Packing

BOX DIMENSION
   - 1244mm X 650mm X 388mm (L x W x H)

[Diamond-Models Ι. Γεωγιάδης]

PHOENIX MODEL GENESIS .46-.55 SCALE 1:8 ARF








Introducing

    The most successful aircraft in air racing history. Phoenix proudly introduces the Genesis .46-.55 a quick to assemble, sport scale version for 50 sized power plants that is ready for high speeds and good flight performance.

Technical data

- Wingspan: 1533mm (60.35in)
- Length: 1310mm (51.57 in)
- Flying weight: 2.8-3.2 kg
- Wing area: 29 dm2
- Wing loading: 105g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Mechanic retract With CNC Suspension Metal Struts and spring tail gear (included)
- Spinner size: Plastic 70mm (included)
- Radio: 6 channel minimum (not included)
- Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle and 2 servo retract Futaba S3170G (not included)
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .46-.55 / 2-stroke or .52/4-stroke glow engine (not included)
- Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
- Gravity CG: 65mm (2.6 in) Back from  the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
- Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
- Control throw Rudder: Low: 20mm right/left, 15% expo; High: 30mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Scale Civilian
RECOMMENDED MOTOR AND BATTERY SET UP           
- Motor: RIMFIRE .46-.55 (not included)
- Lipo cell: 4- 6 cells / 4000 – 5500mAh (not included)
- Esc: 50-80A (not included)
Feature

- Designed for compability with both GP and EP flight
- Covered in genuine ORACOVER®
- Super Finishing Fiber Glass Cowl
- Attractive Scale Colour Scheme
- Mechanical retract With CNC Suspension Metal Struts included
- Standard Installation For Engines With Muffler
- Removable Top Hatch Makes Flight Battery Installation Easy for Electric Power Option
- Factory Painted and Detailed Canopy
- Plug in Wings for Convenient Transportation and Storage
Colour chart

-  White                 (# 21010)
-  Blue                   (# 21050)
-  Cub Yellow       (# 21030)
-  Corsair Blue    (# 21019)

[Diamond-Models Ι. Γεωγιάδης]

Graupner Flybarless system receiver GR-18+3xG+3A + Vario HoTT




Description

With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new Hopping Telemetry Transmission high-frequency unit with state-of-the-art components and software. For reception, a hardware-aerial diversity system always switches to the better aerial signal and for transmission always uses the aerial that was last used for reception. This ensures that the return channel data are sent via the better positioned aerial. Without add-on sensors, the parameters receiver voltage and temperature, as well as signal strength are transmitted.

3-axis gyro + 3-axis acceleration sensors + Vario:

    Stabilization of the model aircraft in difficult wind conditions for up to 3 axes
    Natural flight behaviour thanks to proportional gyro offset adjustment
    Very good stabilization for tight flight figures
    Thanks to the 3-axis gyro, even aerobatic models that are difficult to master can be flown very comfortably; simplifying aerobatic flight extremely
    Flight figures can be flown very tightly
    Simple adjustment of gyro assignment
    Adjustment of the parameters via the HoTT telemetry
    Altitude sensor for vario-function and altitude
    Flybarless system for helicopters
    I2C interface for future addition of functions

Specification

Temperature range : - 15...+70 °C
Aerial length: 2 x Draht 145 (Antenne 30) mm
All-up weight, approx.: 14 g
Frequency : 2400 ... 2483.5 MHz
Range approx. : 4000 m
Dimensions (LxWxH): 46 x 21 x 14 mm
Modulation: 2.4 GHz FHSS
Charging rate : 70 mA
Operating voltage : (2,5) 3,6 ... 8,4 V
Warnhinweis: Warnhinweis_14+_EN

[Diamond-Models Ι. Γεωγιάδης]

Graupner Ultra DC Quad Charger 4 x 80 Watt 1-6s Li-po










Overview:

Graupner/SJ "ULTRA DC QUAD" is a computer-controlled four-port balancer charger that features a high-performance microprocessor. The advanced software allows you to charge four batteries of varying types and numbers of cells simultaneously.
The charger provides multiple charge programs and a balancer connection for up to 6 cells.

Age recommended by manufacturer: 14 years and up

Characteristics:

    Optimised operating software
    One display and one input keyboard per charger output
    Integrated balancer
    Balanced discharge
    Charge/discharge capability for LiPo/LiFe/LiIon, NiMH, NC, PB batteries
    Normal, fast and storage charge programs
    Automatic error detection and shut-off
    delta peak cut-off
    10 x 4 programmable battery memories

The Set contains:

    ULTRA DC QUAD charger
    EH to XH 6S Adapter Board and 6S Cable x 4
    DC input cable
    Temp Sensor x 2
    charge Cable(R, BK)
    Alligator Clip(R, BK)
    Manual

Specification
Dimensions (LxWxH)    225 x 170 x 40     mm
Socket type    DC Eingang XT-60    
Artikelbild 1    S2007_Ultra_DC_Quad_01    
Artikelbild 2    S2007_Ultra_DC_Quad_02    
Artikelnummer    S2007    
Operating voltage    DC: 11 ... 15     V
Balancer socket    1-14 NiCd,NiMH/1-6 Lixx/1-6 Pb    
All-up weight, approx.    1012     g
Input voltage    External DC Power Supply 11-15     V
Discharge current    4x(max.5W) 0,1 ... 1     A
Capacity    4x 10 ... 9900     mAh
Charge current    4 x (max.80 W) 0.1 ... 7     A
WarengruppenNr    72    

[Diamond-Models Ι. Γεωγιάδης]

Mirage 2000 PNP gray - FlyFly Hobby Jet (+EDF 7B +Alu gear set +engine1500kv)




Mirage 2000 PNP gray- FlyFly Hobby Jet

Set includes:

    EDF
    gear
    engine bRUSHLESS MOTOR 3660 1500KV

 

Requires (not included):

    4x micro servo
    6 channel Radio 2.4 GHz
    Li-Po Battery (6 cells)
    ESC

 

Numer producenta: FF-D001C-G
Technical data
Length:    1350 mm
Wingspan:    955 mm
Weight:    1900 g
Wing area:    39 dm2
Material:    Styrofoam (EPS)

[Diamond-Models Ι. Γεωγιάδης]

R-PLANES PIONEER 2,4 GHz RTF Mode 2 wingspan:1400mm









Model glider PIONEER's R-​​Planes.

Pioneer glider entirely built with extremely high-impact EPP foam. In the middle of the hull, turret placed pusher propeller model - thanks to this solution, it will not be damaged in the event that in. Failed landings. Model designed for both beginners and intermediate modelers.

RTF version - complete with a comprehensive set of aircraft equipment.

The RTF kit includes the following elements:

     Hull (with mounted: brushless motor, speed controller, propeller hub, metal cap, 2 bowdenami, 2 servos, and a lockable cockpit magnets)
     The wings (each wing has a built-in 2 servos with thrusters)
     rudder
     elevator
     4-channel 2.4GHz transmitter in MODE 2 (gas left) along with 6-channel receiver 2.4GHz
     Bayonet coupling carbon wing
     LiPo power model: 1300 mAh, 11,1V 20C (equivalent Redox 11,1V 1300 mAh 20C)
     Charger 12V 800 mA for 2-3S lipo packages (7.4 - 11,1V) with the adapter "Jack - Alligator Clip"
     The pusher propeller 5x8 "
     Set of small accessories:
         Cord - splitter servo type "Y"
         2 x T-bar lift pasted
         2 x Complete mount bowden
         1 x set of velcro (1 x large, 2 x small)
     Manual in Polish
     Colorful box with information about the model in Polish

Characteristics:

     Wingspan: 1400mm
     Hull length: 925 mm
     Wing area: 26 dm2
     Load wings: 25 g / dm 2
     Starting Weight: 650 g
     Approximate flight time: approx. 15-30 min.
     Level of play - for beginners and intermediate modelers

Components necessary to run the model:

     Adhesive foam EPP
     Basic tools (eg. A screwdriver)
     8 x alkaline battery R6 or AA battery to power the transmitter (eg. Graupner Graupner Mignon alkaline battery LR6 AA 1.5V)

Notes: The apparatus version MODE II - rod gas left.

[Diamond-Models Ι. Γεωγιάδης]

Redox BETA COMBO Charger with 230V power supply









Redox Beta is a small and universal charger with built-in Lithium cell balancer. Thanks to included Redox 12V/5A Power Supply it can be powered by 12V or 230V!

Specifications (Redox Beta charger):

    Dimensions: 113 x 65 x 23 mm
    Operating voltage: DC 11.0~18.0 V or AC/DC Adapter 230V 5A (included)
    Circuit power:
        Max. charge Power 50W
        Max. discharge power 5W
    Charge current range: 0.1~5.0A
    Discharge current range: 0.1~1.0A
    Balancing current: 300 mAh/cell
    NiCD/NiMH battery cell count: 1~15 cell
    Li-Po/Fe/Ion cell count: 1~6 cell
    Pb battery voltage: 2~20V
    Weight: 195 g

Specifications (Redox 12V/5A Power Supply):

    Dimensions: 125 x 57 x 31,5 mm
    Input voltage: 100~265V / 47/60 Hz AC
    Output voltage: stabilized 12V
    Output current: constant 5A
    Weight: 313 g

Set includes:

    Redox Beta charger
    Redox 12V/5A Power supply
    Balancer adapter for 2-6 lithium cell
    Power cord 12V DC (Jack - Aligator clips)
    1 x DEANS socket - Aligator clips adapter

    1 x DEANS socket - BEC socket adapter
    1 x DEANS socket - Futaba type servo socket (compatible with JR servo plugs)
    1 x DEANS socket - Glow clip charging adapter

    Manual

FEATURES:

    Optimized operating software
    Internal independent lithium battery balancer
    Discharger
    Adaptable to various type of lithium battery
    Fast charge and storage mode for lithium battery
    Maximum safety
    Automatic charging current limit
    Capacity limit
    Temperature treshold (optional)
    Processing time limit
    Input power monitoring
    Data recording and loading

[Diamond-Models Ι. Γεωγιάδης]

Electric-retracts XL main for 10kg 2 pcs





Electric retract set for airplanes and helicopters
- The all in one system retract system require no complex linkages nor extra servo
- The retracts are operated as a servo and connected to the receiver.
- The 5th channel of the transmitter switches in or out the retracts.
- The design allows an easy installation in almost every model.
- The main retracts (2) and the steerable front retract (1) are sold separately.
- The support blocks are made out of strong aluminium.
- You will be surprised how good your airplane flies with its landing gear retracted.

Type XL Front Nose Wheel set
Size L - W - H 92,2mm x 51,0mm x 30,6mm
Weight 102g
Speed 4.8v (s/60°) 6
Speed 6.0v (s/60°) 5
Torque 4.8v 15,5kg*cm
Torque 6v 18,6kg*cm
Gears Metal
Axle diameter 5mm
Output Angle 90°
Airplane weight up to 10kg

[Diamond-Models Ι. Γεωγιάδης]

GREAT PLANES - Gas Engine Ignition Kill Switch