www.Diamond-Models.gr

  Καταστήματα
  Κεντρική σελίδα
  Αρθρα
  Links
  Σύλλογοι
  Γιατί αυτή η σελίδα;

WWW Aeromodelling GR

Aeromodelling GR - IBabylon ThemeClassic YaBB SE ThemDelta TPNetBiz TPOmega TPSMF Default Theme

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή

Viper Jet Ferrari Colour 2.25mt

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές Ιανουαρίου 2016

[/url]

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές 16 Φεβρουαρίου 2016

[Diamond-Models Ι. Γεωγιάδης]

[size=16[/b]pt]Νέες Παραλαβές Φεβρουαρίου Συνοπτικά[/size]

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή Φεβρουαρίου απο GRAUPNER

Graupner SEA FURY 900mm PnP





Description
Wings, fuselage, and tailplane pre-covered with foil
6 DES 476BB servos installed with rudder linkages
COMPACT 345 Z 7.4V brushless motor fully installed
GR-16 HoTT receiver installed
Graupner 2/1600 7.4V LiPo battery included
GRP engine bonnet pre-painted
Deep drawn cockpit canopy with pilot figure already painted
Soft rubber wheels for main undercarriage and tailwheel
Comprehensive operating instructions in German, English, and French

Order no. 9351.HOTT

    Realistic semi-scale RFH model
    Outstanding flight performance
    Comes standard with landing flaps
    Cockpit can be removed for easy access for LiPo battery
    Two-piece aerofoil

RC functions
Rudder
Elevator
Aileron
Landing flaps
Motor speed

Specification
Wing area : 15 dm²
All-up weight, approx.: 870 g
Total surface area, approx. : 18 dm²
Tailplane area : 3 dm²
Overall length, approx.: 820 mm
Wingspan approx.: 900 mm
Wing loading : 48 g/dm²

[Diamond-Models Ι. Γεωγιάδης]

GRAUPNER WP STARLET 900 wingspan 900 mm PnP










    Wings, fuselage, and tailplane pre-covered with foil
    4 DES 417 BB servos installed with rudder linkages
    COMPACT 260Z 7.4V brushless motor fully installed
    GR-12 HoTT receiver installed
    Graupner 3/650 11.1V LiPo battery included
    GRP engine bonnet pre-painted
    Deep drawn windshield with painted pilot figure
    Soft rubber wheels for main undercarriage and tailwheel
    Comprehensive operating instructions in German, English, and French


Order no. 9353.HOTT

    Realistic semi-scale RFH model
    Outstanding flight performance
    Tail-dragger undercarriage with wheel covers
    Cockpit can be removed for easy access for LiPo battery
    Two-piece aerofoil

Specification
Overall length, approx.   600    mm
Artikelnummer   9353.HOTT   
Wing area    11,2    dm²
Total surface area, approx.    13,5    dm²
All-up weight, approx.   500    g
Tailplane area    2,3    dm²
Wingspan approx.   900    mm
WarengruppenNr   154   

RC functions

    Rudder
    Elevator
    Aileron
    Motor speed

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή Yuki Model Team Bonhomme Edge 540 ARF 1.700mm for 20cc - 26cc













 Technical data
Scale: 1: 4.4
Engine required: 1.20 2T Glow or 20cc-26cc Petrol engine
wingspan:1,700 mm
Material:Wood
covering:ORACOVER

Functions
Elevator:Yes
Rudder:Yes
ailerons:Yes
Motor:Yes
Tail wheel:Yes

Scope of delivery
Fuselage:ready covered
Wing:ready covered
empennage:ready covered
Landing gear:Yes
Spinner:Yes
Racing Pilot:Yes pre-installed
Instruction manual:German, English

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή σε Μπαταρίες -Καλώδια -Βύσματα και Αξεσουάρ

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή 16 Μαρτίου 2016

ST Model Acrobat EP wingspan:1230mm PnP upgraded for 4s lipo




Just one look at the massive control surfaces and you can see that the new ST Model Acrobat is capable of serious 3D performance. And it doesn’t disappoint! Knife edge loops, stable harriers and waterfalls are well within the model’s capability. This is a model that will encourage you to push yourself to the limit.

Supplied with a powerful brushless motor and 50A ESC together with pre-installed 17g servos. All you need is your choice of transmitter and receiver plus a suitable 4S 2200mAh Li-Po and charger.

ST Models tough EPO construction ensures that this is a model that will last many seasons.

• Fully 3D capable design
• Removable side force generators
• Extreme 4S brushless power
• Easy glue free assembly
• EPO foam construction    

Specification
Wingspan:    1,230mm (48.5")
Length:    1,333mm (52.5")
Weight:    1.44Kg (50.8oz)
Servos:    4 x 17g Mini (Inc.)
Radio System:    4-5 Channel (Req.)
Electric Motor:    Brushless Outrunner (Inc.)
LiPo:    4S 14.8v 2200mAh (Rec.)
Speed Controller:    50A (Inc.)

Ripmax Bullet .40-0.55cu ARTF




The legendary 70s Bullet returns and is set to create quite a stir amongst an entirely new generation of model pilots! The original Bullet was regarded by many as the definitive sports model of its time and this new improved version will undoubtedly acheive the same iconic status. The Ripmax Bullet enjoys a 10% size increase over the original to cater for todays modern high output engines. This also provides for a lighter wing loading and improved in-flight handling characteristics. And....whats more, this time it comes factory built and lovingly hand finished!

The legend returns!
High quality ARTF construction
Minimal assembly time
 Outstanding flight performance    

Specification
Wingspan:    1475mm (58.0)
Length:    1290mm (50.
Radio System:    4 Channel
IC Engine:    .40~.55 2 Stroke

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή 18 Μαρτίου 2016




και αλλα πολλα

[Diamond-Models Ι. Γεωγιάδης]

Νέες Παραλαβές Απριλιου

YUKI DHC-2 Beaver PNP 1.520mm with wheels and Floats








Technical data
Scale:1: 6.6
wingspan:1,510 mm
Length:960 mm (suspension), 1.030 mm (float)
Weight:1,275 g (suspension), 1.415 g (float)
Material:EPO
Motor:BL
controller:BL

Functions
Elevator:Yes
Rudder:Yes
ailerons:Yes
flaps:Yes
Motor:Yes
Navigation lights:Yes
Landing light:Yes
Tail wheel:Yes
Float rudders:Yes


Scope of delivery
Fuselage:decorated
Wing:decorated
empennage:decorated
Drive:installed
servos:installed
Landing gear:Yes
Floats:Yes
Lighting:installed
Instruction manual:German English

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή 6-4-2016

Μολις Παραλάβαμε το εκπληκτικό σε δυνατότητες

Wingsland Scarlet Minivet 390 FPV 5.8Ghz with HD Camera,Gimbal, 2,5" Display OSD RTF

Τιμή:649,00€

[/url]

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή από www.Diamond-Models.gr

Moki 300cc 5 Cylinder Stern Motor

Description:

5 cyl. Radial engine with 300 ccm. Rear intake,
mounted ring muffler,
Processor controlled ignition with integrated ignition timing.

Technical specifications:

Displacement 300 ccm
Capacity about 18 hp
weight 6300g

Recommended propeller:

Two Blades of 34 x 18 SEP 4300 U / min


Three Bladel 32 x 20 SEP 3600 U / min

*The motor should be measured on the ground between 3600 and max. 4200 U / min to operate.

**The Maximum speed in the air should not exceed about 5500 U / min.

[Diamond-Models Ι. Γεωγιάδης]

Νέα Παραλαβή

TorqPro 61 cc Benzin Engine





2-Stroke engine TorqPro with capacity 61cm3.

Technical data:

    Displacement: 61 cm3
    Piston diameter: 46 mm
    Stroke: 35,6 mm
    RPM range: 1100 - 8000 RP
    Power: 6,1 KM at 8000 RPM
    Usable fuel mixture: petrol + synthetic oil (40-50:1)
    Curb weight: [1445 g]
    Muffler weight: [98g]
    ESC weight: [108 g]
    Type of spark: NGK CM-6
    Type of carburetor: Walbro

PHOENIX MODEL Future .40 ARF plane wing:1500mm




The Future is a 40-size airplane capable 3D performance. Because of the stability provided by the middle wing placement, the Future is an excellent, unintimidating fun flyer. It is constructed from sturdy, lightweight balsa and plywood. Best of all, the Future, with its deep bevels for extreme 3D throw and counter-balanced rudder and elevators, provides plenty of aerobatic thrills.

Features:

    Covered in genuine ORACOVER
    Can be flight ready in just 2 to 4 hoursSuperior for 3D performance
    Fiberglass cowl
    Extremely lightweight laser-cut all-wood construction
    95% factory built, covered and painted
    Can be converted for electric flight
    Preinstalled the canopy

Colour chart:

    Light Transparent Red   (31-029)

Requires:

    Engine: 2-stroke .40 cu in (6.55cm3)
    4 channel radio with compatible receiver
    5 Servos

Manufacturer stock No. PH043
Technical data
Length:    1411 mm
Wingspan:    1495mm
Weight:    2800 - 3200 g

[Diamond-Models Ι. Γεωγιάδης]

Ευχόμαστε Ολόψυχα σε Όλους

Καλή Ανάσταση και Χρόνια Πολλά.!!!