RC-FANS88, e-shop in China

  Καταστήματα
  Κεντρική σελίδα
  Αρθρα
  Links
  Σύλλογοι
  Γιατί αυτή η σελίδα;

WWW Aeromodelling GR

Aeromodelling GR - IBabylon ThemeClassic YaBB SE ThemDelta TPNetBiz TPOmega TPSMF Default Theme

[rcfans88.com]

Dear All,

We had launched a new  Fly CAM DV Video Recorder, Using this product in criminal activities is strictly prohibited, or else at your peril.

Features
-Resolution: 640*480; stable follow shot; real AVI-format files with good recording effect, can be played by any video player. When the battery is exhausted, the video/sound in recording will be stored automatically before shutdown, no worries about data lost.
-Switch ON/OFF: turn on (ON) and shut down (OFF)
-Pressing the round button for 1 second first,then select DV video recording by the “hold” key,push it up,the blue light will flash (video recording is started) if pressing the round button once; pressing it twice will stop the flashing of blue light (video recording is stopped and the video is stored).If you want to take a photo,Select CAM recording by the “hold” key,and push it down, the yellow light will flash ,(photo recording is started )if pressing the round button once; pressing it twice will stop the taking(photo recording is stopped and the photo is stored).

-SD card: insert ID card according to the ID insertion diagram of CAM-V2, the SD card whose capacity is no more than 8G is allowed.
-Charging: charging is started when inserting the USB interface into a computer; switching off CAM-V2 will enable charging to be finished more quickly; the red light is shut down when charging is finished.
-USB connection: in the mode of DV, the CAM will appear as a U disk in computer through USB connection, and a direst access to its content is allowed. In the mode of REC, access to its content is forbidden (online upgrade of extended function is reserved)

Product Details
-Size: 72mm * 20mm * 11mm
-Weight: 15g
-Storage: small SD card / T-FIASH (2~8G)
-Battery: built-in 300mAh lithium battery, 2-hour battery life for each charging
-CAM: 1.3 Mega Pixels
-Recording format: AVI
-Video file: approx. 25MB per minute
-Video file time: 1 hour for the 2G SD card (included)
-CAM: 1.3 Mega Pixels
-Record Format: AVI (352x288)
-Memory: mini SDT-FIASH(128MB-8GB)
-Built in MIC
-Recommended Max Range for Objects: 2~3 Meters (Audio 1~2 Meters)
-Power Source: Built in Rechargeable Li-ion Battery (recharge directly from USB port)
-Up to 3 hours recording with one charge
-Continuous recording until memory is full or manually shut off
-User Manual
-Temperature：5C to 50C
-USB Cable 
-Manufacturer and Origin: China
-Accessories:USB 、Charger
Item Packing
-Fly CAM DV Video Recorder x 1 

For more R/C product details, Welcome to visit www.rc-fans88.com.

If you have any enquiry, please feel free send email to :rcfans88@gmail.com.

[rcfans88.com]

Hi,

WWW.RC-FANS88.COM had launch Hobbywing Platinum ESC for Airplane and Helicopter with good price.
Hobbywing Platinum-40A  http://www.rc-fans88.com/details.asp?prodid=1430
Hobbywing Platinum-80A  http://www.rc-fans88.com/details.asp?prodid=1432
Hobbywing Platinum-120A-HV ESC  http://www.rc-fans88.com/details.asp?prodid=1436
Hobbywing Platinum-150A-OPTO   http://www.rc-fans88.com/details.asp?prodid=1434
Hobbywing LED Program Card For Brushless ESC (Version 2.0)   http://www.rc-fans88.com/details.asp?prodid=1438

If you interested in them, Please feel free to contact rcfans88@gmail.com. We will offer good price to you.

[rcfans88.com]

KDS 800 AVCS Dual Rate Digital Gyro for heli almost like Futaba GY401, But with very good price.

http://www.rc-fans88.com/details.asp?prodid=1062

Feature

-Minimizes changes in an aircraft's attitude by wind etc

-Angular acceleration commands used

-Sensor vibration proofing

-Simple sensitivity adjustment

--KDS800 Very High Quality AVCS Heading Hold Gyro

Product Details

-Dimension (mm): 28*28*20

-Digital proportional R/C system

-Operating voltage: 4.8V~6V

-Operating temperature: -10? ~ +45?

-Operating current: 80A


Item Packing

-KDS 800 AVCS Dual Rate Digital Gyro x 1

-English Manual x 1

[rcfans88.com]

Xerun  120AESC+Motor 6.5T+Program Card Combo For 1/10
http://www.rc-fans88.com/details.asp?prodid=1455

Features
-Compatible with all sonsorless brushless motors and most of sensored brushless motors such as LRP, Novak, Orion, Feigao, etc.
-Seamlessly change to sensorless working mode when the sensor cable is broken.
-Lithium battery and NiMH battery supported.
-Excellent start-up, acceleration and linearity features.
-Firmware can be upgraded through an USB adapter on the Advanced Professional LCD Program Box (Optional  equipment).
-User programmable.  Easily programmed with only one button on the ESC and compatible with the 3 Digital LEDs Program Card and the Advanced Professional LCD Program Box.
Product Details
-Output: Continuous current 120A, burst current 760A.
-nput: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.   Note1
-BEC Output: 5.75V@3A linear mode built-in BEC.
-Resistance: 0.0003 Ohm.
-Motor Supported: Sensored brushless / Sensorless Brushless.
-Suitable Brushless Motor: 
With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road:  >=5.5T
With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road:  >=8.5T   
-Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for competition race.
1/10, 1/8 rock crawler.1.8
-Size: 43mm(L) * 36mm(W) * 33mm(H).1.9
-Weight: 65g(Without wires) 
-KV:5200
-Main Application: 1/10 On-road normal race or 1/10 Off-road competitive race (Modified group)
-Diameter:35.8mm
-Length (Without Shaft):52.5mm
-Shaft:3.17mm
-Shaft Length:15mm
-Weight:200g
-Special Notes: Fixed Timing

Note1:
-For brushless motor, the ESC supports up to 9 cells NiMH or 3 cells Lipo battery.
-For 4-6 cells NiMH or 2 cells Lipo: You need not change the cooling fan coming with the ESC;
-For 7-9 cells NiMH or 3 cells Lipo: You must change the standard cooling fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V)

Item Packing
-Xerun120A (Version2.0) brushless ESC with cooling fan x 1
-6.5Tsensored brushless motor x 1
-3 Digital LEDs program card x 1

[rcfans88.com]

Hobbywing Platinum-120A-HV ESC for Trex 600

http://www.rc-fans88.com/details.asp?prodid=1390

Platinum-120A-HV ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter.

1  Typical Applications

1.1 Super powerful  for 600 class helicopter (Working with 8 or 10 cells Lipo battery)

1.2 Very powerful for 700 class helicopter (Working with 10 or 12 cells Lipo battery)

1.3 Super powerful for large scale aircraft such as F3A

2  Specification

2.1 Output:  Continuous 120A, burst 180A up to 10 seconds.

2.2 Input Voltage:  5-12 cells lithium battery or 15-36 cells NIMH battery.   

2.3 BEC:  None.

2.4 Control Signal Transmission: Optically coupled system.

2.5 Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.

                               (BLM: BrushLess Motor)

2.6 Size:  88mm (L) * 55mm (W) * 15mm (H).

2.7 Weight:  125g.

3  Features

3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.

3.2 Wide-open heat-sink design to get the best heat dissipation effect.

3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.

3.4 Smooth, linear, quick and precise throttle response.

3.5 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.

3.6 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference.

3.7 Perfect governor mode for helicopter. 

3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box.

3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

[rcfans88.com]

Hobbywing SeaKing-35A Brushless ESC for Boat
http://www.rc-fans88.com/details.asp?prodid=1075

Features
-Use top quality electronic components to enhance the current endurance ability of the ESC.
-Special designed for RC boat, with excellent start-up, acceleration and linearity features.
-With water cooling system.
-The whole ESC is waterproof.
-With 2 running modes ("Forward Only" mode and "Forward/Backward" mode).
-With brake function.
-With 8 steps of timing adjustment to get the best compatibility with various of motors.
-2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / -Over-heat protection / Throttle signal loss protection.
Product Details
-Output: Continuous current 35A, burst current 190A.
-Input: 4-12 cells NiMH/NiCd or 2-4 cells LiPo.   Note1
-BEC Output: 6V/1.5A.
-Resistance: 0.0015 Ohm.
-Motor Supported: Sensorless Brushless Motor
-External  diameter of the water cooling pipe: 4.0mm
-Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
-Weight: 30g(Without wires)

Note1:
 For 4-9 cells NiMH/NiCd or 2-3 cells Lipo: You needn’t change anything of the ESC.
 For 10-12 cell NiMH/NiCd or 4 cell Lipo: You must disable the output of built-in BEC, and use a 3A UBEC to supply the receiver.

Item Packing
- Seaking-ESC-35A

[rcfans88.com]

Xerun 120AESC+Motor 5.5T+Program Card Combo For 1/10

http://www.rc-fans88.com/details.asp?prodid=1454

Features
-Compatible with all sonsorless brushless motors and most of sensored brushless motors such as LRP, Novak, Orion, Feigao, etc.
-Seamlessly change to sensorless working mode when the sensor cable is broken.
-Lithium battery and NiMH battery supported.
-Excellent start-up, acceleration and linearity features.
-Firmware can be upgraded through an USB adapter on the Advanced Professional LCD Program Box (Optional  equipment).
-User programmable.  Easily programmed with only one button on the ESC and compatible with the 3 Digital LEDs Program Card and the Advanced Professional LCD Program Box.
Product Details
-Output: Continuous current 120A, burst current 760A.
-nput: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.   Note1
-BEC Output: 5.75V@3A linear mode built-in BEC.
-Resistance: 0.0003 Ohm.
-Motor Supported: Sensored brushless / Sensorless Brushless.
-Suitable Brushless Motor: 
With 2 cells Lipo or 4-6 cells NiMH, 1/10 on-road: >=3.5T, 1/10 off-road:  >=5.5T
With 3 cells Lipo or 7-9 cells NiMH, 1/10 on-road: >=5.5T, 1/10 off-road:  >=8.5T   
-Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for competition race.
1/10, 1/8 rock crawler.1.8
-Size: 43mm(L) * 36mm(W) * 33mm(H).1.9
-Weight: 65g(Without wires) 
-KV:6000
-Main Application: 1/10 On-road normal race or 1/10 Off-road competitive race (Modified group)
-Diameter:35.8mm
-Length (Without Shaft):52.5mm
-Shaft:3.17mm
-Shaft Length:15mm
-Weight:200g
-Special Notes: Fixed Timing
Note1:
-For brushless motor, the ESC supports up to 9 cells NiMH or 3 cells Lipo battery.
-For 4-6 cells NiMH or 2 cells Lipo: You need not change the cooling fan coming with the ESC;
-For 7-9 cells NiMH or 3 cells Lipo: You must change the standard cooling fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V)
Item Packing
-Xerun120A (Version2.0) brushless ESC with cooling fan x 1
-5.5Tsensored brushless motor x 1
-3 digital LEDs program card x 1

[rcfans88.com]

Corona 2.4G RF Module & Receiver for Futaba

http://www.rc-fans88.com/details.asp?prodid=1470

Features
-Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.
-Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz  adheres strictly to Frequency-Hopping Spread Spectrum (FHSS) communication standards by constantly switching across a wide band of frequencies. Combining Corona’s software with FHSS we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available. 
Features of Corona 2.4GHz transmitting module and receiver
The new lightweight, advanced technology unit has the following features:
-Extended operating range 1.5 km range, which has been tested in a real flying environment.
-A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.
-One-key user friendly setup mode.
-Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.
-The unique receiver design makes the Corona module easy to install and ensures reliability.
-Corona's advanced needle design ensures the lightest possible receiver
-By following these steps you will ensure your transmitter and receiver are properly setup and ready to fly.
1. Turn the transmitter on and adjust your transmitter to PPM mode and then turn the transmitter off.
2. Press and hold the programming button on the transmitting module,turn the transmitter on,then you can release the button.(Attention: Not keep hold the button down over 3 seconds,or its ID will change randomly) The LED on Module will flash between red and green indicating the transmitter is ready to bind with the receiver
4.Power on the receiver(s) without pressing any button,then power up the transmitter also without pressing button, the LED on the transmitter light yellow. The RF-link will normally connect in 15~20 seconds between transmitter and the receiver(s).If linked the LED on the receiver(s) will light red without any flash indicating the receiver(s) is operating properly. If the LED flashes sometime or does not light at all. Repeat this step until link is connected properly.
After set up receiver and transmitter,user only take the 4th step in normal flying.
We hope you enjoy your new 2.4 Ghz receiver and transmitter modules. They have been designed and produced using the highest quality control measures available.  If you have any questions please do not hesitate to contact us or visit our website. 
Range checking
This is necessary for safe operation and must be incorporated into your setup and pre-flight operations. 
Failsafe setting for receiver
When RF linked between transmitter and receiver(LED on receiver light on,and all servos  under controll)
Caution must be exercised when using the unit in an environment that consists of  metal fences, concrete buildings, or rows of trees.  In this environment you may experience unexpected radio wave multipath interference.
You must conduct a range check as follows (Note this is done with the receiver out of the plane):
1. Place the receivers at least two feet (60cm) above non-metal contaminated ground; for example a wooden bench.
2. Fix the antenna of receiver horizontally. Don’t let antenna touch the ground.
3. Connect a servo to channel one.
4. Place the antenna of the transmitter in a vertical position.
5. Turn on the transmitter and receiver and walk away from receiver while moving the stick which controls channel one. Ask someone to check the distance at which the servo doesn’t respond.
Attention: Controlling distance is greatly related to the transmitter power, please use freshly charged battery packs when you conduct the test. Controlling distance is affected by environment too. Please test it in the open away from any obstacles. The controlling distance in the air is greater than that on the ground. Our controlling range is based on a conservative ground test.
Product Details
-Type: Futaba Combo
-Size: 58.5x37.5x22mm(2.3"x1.47"x0.86")
-Weight: 29g
-Operating voltage: 6V-13V
-Operating current: 100mA
-Output Power: <10mW
-Resolution: 1024
-Compatible with: FUTABA: 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. HITEC: Optic 6, Eclipse 7. WFLY: WFT09 WFT08 

Item Packing
-CT8F x 1
-CR8D x 1

[tasospap]

Το εχει δοκιμασει κανεις? Εγω εχω μια OPTIC 6 εχει διαφορα με την Futaba?

[bladekiller]

   Αν ξεκινήσεις από το πρωί να παντρεύεις πομπό με δέκτη πότε ανοίγοντας πρώτα τηλεκατεύθυνση και μετά δέκτη και πότε το ανάποδο και περιμένεις κάθε φορά και καμιά τριαντεριά δευτερόλεπτα τότε εκεί κατά το μεσημεράκι θα πετάξεις.  . Οσο για το FHSS καμιά σχέση με το   FASST των μόντουλ της futaba.
   Εντάξει είναι φτηνό αλλά απλά φτηνό.



Φιλικά Κώστας.

[rcfans88.com]

Fitec 9650 Servo 25g for 450/500 Helicopter

http://www.rc-fans88.com/details.asp?prodid=1449

Features
-Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter
Product Details
-Weight：25g
-Size：36*15.2*29mm                   
-Speed ：4.8V: 0.10sec/60°
-Speed ：6V: 0.07sec/60°   
-Stall Torque ：4.8V: 2.0 kg/cm
-Stall Torque ：6V: 2.2 kg/cm
-Operating Voltage：4.8-6Volts 
-Tail Lock
Item Packing
-Fitec 9650 Servo 25g  for 450/500 Helicopter x 1

-Spare Parts x 1 set

[rcfans88.com]

Fitec 9257 Servo 25g for 450/500 Helicopter  USD9.62 only

http://www.rc-fans88.com/details.asp?prodid=1448

Features
-Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter
Product Details
-Weight：25g
-Size：36*15.2*29mm                   
-Speed ：4.8V: 0.09sec/60°
-Speed ：6V: 0.07sec/60°   
-Stall Torque ：4.8V: 2.0 kg/cm
-Stall Torque ：6V: 2.2 kg/cm
-Operating Voltage：4.8-6Volts 
- Head Lock
Item Packing
-Fitec 9257 Servo 25g  for 450/500 Helicopter x 1

-Spare Parts x 1 set

[rcfans88.com]

PG800 Gyro and LCD Setting cart for T-rex 500/T-rex 600

http://www.rc-fans88.com/details.asp?prodid=1486
Features
 

-Performance specification:

- Better than Futaba GY401, same grade with Futaba GY611
- Identical design with another famous Gyro(you'll know which one I'm talking about on google), they share almost same performance, but with 1/2 of the price
- PG-800 is designed for model helicopter with high accuracy, it gives you the highest standards of operational performance in affordable price.
- It provides greatly consistent yaw rates that avoid outside variables like the helicopter's rotor head speed, rotor disc loading, flight speed, wind, etc. with the aids of a premium quality sensor and a powerful controller
- PG-800 enables you to enjoy a high performance by its excellent location capability and precision
- It is compatible with mini electric helicopter and the 90 class nitro helicopter
- It supports for varied special digital servos
- You can update your configurations by the LCD Programmer
-PG-800 is designed for model helicopter with high accuracy, it gives you the highest standards of operational performance in affordable price.
-It provides greatly consistent yaw rates that avoid outside variables like the helicopter's rotor head speed, rotor disc loading, flight speed, wind, etc. with the aids of a premium quality sensor and a powerful controller.
-PG-800 enables you to enjoy a high performance by its excellent location capability and precision.
-It is compatible with mini electric helicopter and the grade 90 helicopter.
-It supports for varied special digital servos.
-You can update your configurations by the LCD Programmer.

Product Details
 
-Working voltage: 4~10V, current﹤60mA
-Overall dimension: 29.5mm×28mm×12.7mm
-Weight: 17.5g
-Working condition: -10~60℃
-Control actuator compatibility: 1520uSec and 760uSec digital servos at 333Hz and 250Hz


Item Packing
 
-PG-800 Gyro
-LCD Programmer
-Programmer Adapter Cable
-Sticker
-Instruction Manual (English)

[rcfans88.com]

Get Ignited With 3-in-1 iBEC-6A  USD26.2

http://www.rc-fans88.com/details.asp?prodid=1554

Features
-The integral parameter for the spitfire won first in its class in World War Ⅱ. This fighter is a beautiful design that is much sought after with passion by the model hobbyist. The fly circle is vivid with excellent maneuverability and control making it a fighter that is easy for the beginner through to the more advanced hobbyist to fly.
Product Details
-Wingspan: 880mm/34.6in
-Length: 820mm/32.3in
-Weight: 680g/24 oz
-Motor: Brushless Motor C4038-15       
-Battery: LI-PO 11.1V,1300 mAh
-R/C System: ETB41-2.4GHz
-ESC: 20A Brushless ESC
-Servo: 9gx4
Item Packing
-Spitfire Propeller Airplanes 2.4G RTF x 1

[rcfans88.com]

DLE30 30cc Gasoline Engine
Features
-New DLE30 30cc Gasoline Engine
Product Details
-3.7HP/8500rpm
-Idle Speed: 1600rpm/min.
-8.5KG Pulling Force/ 100 meters Altitude
-7.5KG Pulling Force/1800 meters Altitude
-The specification of the aircraft propeller:  18*8  18*10 19*8  20*8
-The type of the sparking plug: NGK CM6
-Exhaust Amount: 30.5cm3
-Diameterx stroke:36mm*30mm
-Ratio of compression: 7.6:1
-Ratio of lubricating capacity: 30:1
-Weight: Main engine-910g. Exhaust Pipe-60g
-Ignition equipment-120g
Item Packing
-DLE30 30cc Gasoline Engine x 1

If anyone interested in them, Please feel free to contact me

Best Regards
Jessica
www.rc-fans88.com