Ορίστε ένα σχέδιο για να ρυθμίζουμε σωστά τους κινητήρες μας...
http://www.jupiter-venlo.nl/Algemeen/Tips/Heli-engine%20Tuning%20EN%20v3.1.pdfνα κάνω όμως και μια ερώτηση από κάποιον που ξέρει καλά αγγλικά για να μου πει τι σημαίνει αυτο
Medium Speed Needle
The Medium speed needle is for fine-tuning the midrange.
The midrange is used a lot in hovering and also in 3D because in between high load manoeuvres
the engine falls back to the mid-range.
• Hover a minute
• Do a full pitch climb to a great height.
• Decend with 80%-100% negative pitch while the helicopter is horizontal.
• Listen to the engine for the “Hanging RPM” effect (as described earlier)
o The engine will go to 40% throttle, (in Idle up) which is the mid-range, but with
no load on the engine.
Just like tuning the Mixture Control screw, the “Hanging RPM” rules apply here.
• Tune the Medium Speed Needle until the “Hanging RPM” effect is gone.
H Μεσαια βελονα ειναι για να ρυθμισεις την μεσαία περιοχή.
Η μεσαια περιοχη εινια χρισμη στο hover αλλα και στο 3d μεταξυ των ισχυρων μανουβρων.
-κανε hover ενα λεπτο
-δωσε φull μοιρες ενα ανεβασμα δλδ
-μετα ξανα κατεβα κατεβαζωντας full moires ετσι ωστε ναξαναεπανερθεις σε hover[/li][/list]
-ακουσε το μοτερ για το κρατημα στροφων που θα κανει.. ειναι ενα φενομενο αυτο...
-φιαξε την μεσαια βελωνα και ξανα κανε το ιδιο μεχρι να εξαληφθει αυτο το φενομενο ( Hanging RPM)